Installation Manual

INS_CWGE2SFP Rev. 12.5.17 PAGE 6
INSTRUCTION MANUAL CWGE2SFP
TECH SUPPORT: 1.888.678.9427
LED Indicators
There are 6 diagnostic LEDs located on the Front panel of the media converter. They provide real-
time information of system and operational status. The following table provides descriptions of the
LED status and their meanings.
LED Color Status Description
PWR Green On Power On
SPD Green On 1000 Mbps UTP Speed
Amber On 100 Mbps UTP Speed
Off 10 Mbps UTP Speed
LNK/ACT (UTP) Green On The unit is linking with its link partner.
Green Blinking The unit is transmitting or receiving packets from UTP devices.
Off No device attached
FDX (UTP) Amber On The UTP port is operating in full-duplex mode.
Off Half-duplex mode or no device attached.
LNK/ACT (Fiber) Green On The unit is linking with its link partner.
Green Blinking The unit is transmitting or receiving packets from UTP devices.
Off No device attached
FDX/COL (Fiber) Amber On The fiber port is operating in full-duplex mode.
Off No device attached.