User Manual

22
5.3 CLI Management
The system supports two types of console management – CLI command. After you login
to the system, you will see a command prompt. To enter CLI management interface,
enter “enable” command. The following table lists the CLI commands and description.
Commands Level
Modes
Access Method
Prompt
Exit Method
About This Mode1
User EXEC
Begin a session
with your
switch.
switch>
Enter logout
or quit.
The user commands
available at the user level
are a subset of those
available at the privileged
level.
Use this mode to
• Perform basic tests.
• Display system
information.
Privileged
EXEC
Enter the
enable
command while
in user EXEC
mode.
switch#
Enter
disable to
exit.
The privileged command is
advance mode
Privileged this mode to
• Display advance function
status
• Save configures
Global
Configuration
Enter the
configure
command while
in privileged
EXEC mode.
switch
(config)#
To exit to
privileged
EXEC
mode, enter
exit or end
Use this mode to configure
parameters that apply to
your switch as a whole.