User Manual

32
6.8 System Event Log
6.8.1 Syslog Configuration
Configure the system event mode to collect system log.
1. Syslog Client Mode: Select the system log mode—Client Only, Server Only, or
Both.
2. System Log Server IP Address: Assign the system log server IP.
3. When Syslog Client Mode is set as Client Only, the system event log will only be
reserved in the switch’s RAM until next reboot. When Syslog Client Mode is set as
Server Only, the system log will only be sent to the syslog server and you have to
type the IP address in the Sysylog Server IP Address column. If the Syslog Client
Mode is set as Both, the system log will be reserved in the switch’s RAM and sent to
server.
4. Select to refresh the events log.
5. Select to clear all current events log.
6. After configuring, select button.