User Manual

37
6.9 SNTP Configuration
You can configure the SNTP (Simple Network Time Protocol) settings. The SNTP allows
you to synchronize switch clocks in the Internet.
1. SNTP Client: Enable/disable SNTP function to get the time from the SNTP server.
2. Daylight Saving Time: Enable/disable daylight saving time function. When daylight
saving time is enabled, you need to configure the daylight saving time period.
3. UTC Timezone: Set the switch location time zone. The following table lists the
different location time zone for your reference.
Local Time Zone!
Conversion from UTC !
Time at 12:00 UTC!
November Time Zone
- 1 hour
11am
Oscar Time Zone
-2 hours
10 am
ADT - Atlantic Daylight!
-3 hours!
9 am!
AST - Atlantic Standard
EDT - Eastern Daylight!
-4 hours!
8 am!
EST - Eastern Standard
CDT - Central Daylight!
-5 hours!
7 am!
CST - Central Standard
MDT - Mountain Daylight!
-6 hours!
6 am!
MST - Mountain Standard
PDT - Pacific Daylight!
-7 hours!
5 am!
PST - Pacific Standard
ADT - Alaskan Daylight!
-8 hours!
4 am!
ALA - Alaskan Standard!
-9 hours!
3 am!
HAW - Hawaiian Standard!
-10 hours!
2 am!
Nome, Alaska!
-11 hours!
1 am!