User Manual

51
6.16 Rate Limiting
You can set up every port’s frame limitation type and bandwidth rate.
Rate Limiting interface
 Ingress Limit Frame type: Select the frame type you want to filter. The frame types
have 4 options for selecting: All, Broadcast/Multicast/Flooded Unicast,
Broadcast/Multicast, and Broadcast only.
The four frame type options are for ingress frames limitation. The egress rate only
supports ‘All’ type.
 All the ports support port ingress and egress rate control. For example, assume port
1 is 10Mbps; the user can set the effective egress rate of port 1 as 1Mbps, ingress
rate 500Kbps. The switch performs the ingress rate by packet counter to meet the
specified rate.
 Ingress: Enter the port effective ingress rate (The default value is “0”).