User Manual

53
ports are treated as belonging to another single VLAN. If the port-based VLAN is
enabled, the VLAN-tagging is ignored.
In order for an end station to send packets to different VLAN groups, it has to be either
capable of tagging packets it sends with VLAN tags or attached to a VLAN-aware bridge
that is capable of classifying and tagging the packet with different VLAN ID based on not
only default PVID but also other information about the packet, such as the protocol.
VLAN – Port Based interface
 Pull down the selection item and focus on Port Based then select button
to set the VLAN Operation Mode in Port Based mode.
 Select button to add a new VLAN group.