User Manual

57
 Select the port you want to configure.
 Link Type: There are 3 types of link type.
 Access Link: Single switch only, it allows the user to group ports by assigning
the same Untagged VID. While this link type is set, the Untagged VID column
field is available but the Tagged VID column field is disabled.
 Trunk Link: The extended application of Access Link. It allows the tagged
frames go across 2 or more switches by assigning the tagged VID to the frames.
Having set this link type, the Tagged VID column field is available but the
Untagged VID column field is disabled.
 Hybrid Link: Both Access Link and Trunk Link are available.
 Untagged VID: Assign the untagged frame VID.
 Tagged VID: Assign the tagged frame VID.
 Select button to have the settings taken effect.
 You can see the link type, untagged VID, and tagged VID information of each port in
the table below on the screen.
802.1Q VLAN interface