Installation Manual

FDC8R232
8-CHANNEL
CONTACT CLOSURE RECEIVER
RS232 LINK
INSTALLATION INSTRUCTIONS
INS_FDC8R232_REVA
12/15/08
Page 2
NOTE: Remove Electrical Connector for Rack Mount Units
Communication Networks
3 Corporate Drive • Danbury, CT 06810 • USA
Tel: [phone] • Toll Free: 1-888-678-9427
www.comnet.net
BLACK WITH WHITE STRIPE
BLACK
LEDS: RED = “No Activity”
GRN = “Activity”
NOTE: RED DOES NOT MEAN “Error”
Power Sources - The product should only be operated from the recommended power source.
Use only a UL Class 2 indoor/dry or Class 3 outdoor/wet power supply.
WARNING: Unit is to be used with a Listed Class 2 or LPS power supply rated 9-12 VDC @ 1A.
WARNING: This unit should be installed in a restrict
ed access location; available through the use
of a lock and key or other means of security. Access should be limited to service personnel who
have been instructed about the reasons for the restrictions to the location. Any and all
precautions should be taken and controlled by the authority responsible for the location.