Installation Manual

INS_FDC8RX1_REVA
01/20/09
Page 2
FDC8RX1
8-CHANNEL
CONTACT CLOSURE RECEIVER
BLACK WITH WHITE STRIPE
BLACK
INSTALLATION INSTRUCTIONS
MULTIMODE
OR
SINGLE MODE
OPTICAL FIBER
LEDS: RED = “No Activity”
GRN = “Activity”
NOTE: RED DOES NOT MEAN “Error”
NOTE: Remove Electrical Connector for Rack Mount Units
Power Sources - The product should only be operated from the recommended power source.
Use only a UL Class 2 indoor/dry or Class 3 outdoor/wet power supply.
WARNING: Unit is to be used with a Listed Class 2 or LPS power supply rated 9-12 VDC @ 1A.
WARNING: This unit should be installed in a restricted access location; available through the use
of a lock and key or other means of security. Access should be limited to service personnel who
have been instructed about the reasons for the restrictions to the location. Any and all
precautions should be taken and controlled by the authority responsible for the location.