Data Sheet

OPTICAL FIBER
TWISTED PAIR
D
1 Fiber
9/125µm SM
Up to 69 km
(43 miles)
D D D
FDX72S1SHR
FDX72S1SHRFDX72S1SHR FDX72S1SHR FDX72S1SHR
SPECIFICATIONS
Data
Data Format RS232, RS422, 2 or 4-wire RS485
w/Tri-State, Manchester, bi-phase, Sensornet
Data Rate DC-1Mbaud (RS422 & RS485)
DC-250kbps (RS232)
Operating Mode Asynchronous, simplex or full-duplex
Bit Error Rate <10-12 @ Maximum Optical Loss Budget
Wavelength 1310/1550 nm, MM and SM
Number of Fibers 1
Optical Emitter Laser Diode
LED Indicators › Power › Status › Receive Data Active
› Transmit Data Active › Port A Fiber Link Status
› Port B Fiber Link Status
Ring-Failure Relay
Normally closed contact: Solid-State relay contacts rated at 0.5 mA,
resistive load.
Connectors
Optical ST
Power Terminal Block
Data Terminal Block
Power
Operating Voltage Range 8 to 15 VDC (or from C1 Rack, sold separately)
Power Consumption 4 W
Electrical & Mechanical
Number of Rack Slots 1
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight: <2 lb / 0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹
FDX72(M,S)1SHR
Multi-Protocol RS232/422/485 Data Transceiver
Featuring Self-Healing Ring Operation
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description
Fibers
Required Fiber
Optical PWR
Budget
Max
Distance²
# Rack
Slots
FDX72M1SHR Universal Data Self Healing Ring 1 in/1 out Multimode 62.5/125µm 16 dB 4 km (2.5 mi) 1
FDX72S1SHR Universal Data Self Healing Ring 1 in/1 out Single mode 9/125µm 19 dB 40 km (25 mi) 1
Accessories
Options
DC Plug-in Power Supply, 90-264 VAC. 5060 Hz (Included)
[1] Add ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit - With Mounting Hardware (Optional, order model DINBKT1 or DINBKT4)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
[2] Distance may be limited by optical dispersion.
In the event of an optical fiber break, the color and pattern of LEDs will aid in locating the fiber break.
01 Dec 2014© 2014 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]