Data Sheet
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FEATURES
› Robust design assures extremely high reliability in
unconditioned out-of-plant/roadside environments
› LED status indicators confirm operating status
› Designed for installation in harsh out-of-plant/
unconditioned industrial or roadside operating
environments (-40º to +70ºC ambient). Fully compliant with
the environmental requirements of NEMA TS-1/TS-2 for
Traffic Signal Control Equipment
› Remote Fault Indication allows the user to determine when
a fiber break or loss of prime operating power has occurred,
or a transceiver in the field has failed
› Voltage transient protection on all power and signal input/
output lines
› Wide optical dynamic range: optical attenuators are never
required
› Hot-swappable rack modules
› Interchangeable between stand-alone or rack mount use –
ComFit
› Fit and Functional Replacement for IFS D1200-R3 Series
› Single Fiber Design
› Lifetime Warranty
APPLICATIONS
› T1/DS-1 and E1 Telephony Networks
› ITS/Traffic Signal Control Equipment
› Building Automation and Environmental Control Systems
› Computer/Data Equipment
The ComNet
™
FDXT1/E1 data transceivers are T1/E1 links that support AMI
and B8ZS data signals over one single mode or multimode optical fiber. The
transceivers synchronize and regenerate data to eliminate jitter accumulated
through the link. Models within this series are available for use with multimode
or single mode optical fiber. Plug-and-play design ensures ease of installation
requiring no electrical or optical adjustments. Each transceiver incorporates a
bi-color (Red/Green) indicating LED for monitoring proper system operation.
The FDXT1/E1 standard size units may be either wall or rack-mounted in a
ComNet card cage, or may be installed in an IFS R3 rack with the selection of the
corresponding model (see ordering information next page).
FDXT1/E1(M,S)1(A,B)
T1/E1 Point-to-Point Transceiver
D
1