Data Sheet

06 Mar 2013
© 2013 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
FDXT1/E1(M,S)1(A,B)
T1/E1 Point-to-Point Transceiver
SPECIFICATIONS
Data Electrical & Mechanical
Data Format: T1/E1 AMI or B8ZS DSL communications Power: R3: 24 VAC @ 2W
ComFit: 9VDC @ 2W
Rack Power: From Rack
Data Rate: T1 - 1.544Mbps
E1 - 2.048Mbps
Operating Mode: Asynchronous, simplex or full-duplex Number of Rack Slots: 1 (Order model for ComNet or IFS racks)
Bit Error Rate: <10-12 @ Maximum Optical Loss Budget Current Protection: Automatic Resettable Solid-State Current Limiters
Wavelength
1310nm, MM and SM Circuit Board:
Size (L×W×H):
Shipping Weight:
Meets IPC Standard
R3: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
ComFit: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
<2 lbs./0.9 kg
Number Of Fibers
1
Optical Emitter
Laser Diode
LED Indicators
Power Indicator
Receive Data Active
Transmit Data Active
Test
Environmental
MTBF:
Operating Temp:
Storage Temp:
Relative Humidity:
>100,000 hours
-40˚ C to +75˚ C
-40˚ C to +85˚ C
0% to 95% (non-condensing)*
* May be extended to condensation conditions by adding
suffix ‘/C’ to model number for conformal coating.
Connectors
Power:
Optical:
Data:
Terminal Block
ST (Standard, other connectors available by request)
R3: Terminal Block
ComFit: RJ-45 for T1(break out kit included) BNC for E1
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description
Fibers
Required Fiber
Optical
Pwr Budget Max Distance
# Rack
Slots
FDXT1/E1M1A Universal Point-to-Point “A” End, ComFit size 1 Multimode 62.5/125µm 16 dB 4 km (2.5 mi) 1
FDXT1/E1S1A Universal Point-to-Point “A” End, ComFit size 1 Single mode 9/125µm 23 dB 69 km (43 mi) 1
FDXT1/E1M1B Universal Point-to-Point “B” End, ComFit size 1 Multimode 62.5/125µm 16 dB 4 km (2.5 mi) 1
FDXT1/E1S1B Universal Point-to-Point “B” End, ComFit size 1 Single mode 9/125µm 23 dB 69 km (43 mi) 1
Included Accessories
Options
9 Volt DC Plug-in Power Supply, 90-264 VAC. 5060 Hz (Included with ComFit version only)
Add ‘/R3’ for IFS D1200 Series-Compatible Unit
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit - With Mounting Hardware (Optional, order model DINBKT1)
OPTICAL FIBER
TWISTED PAIR
D D
FDXE1/T1
A unit
FDXE1/T1
B unit