Data Sheet

21 Nov 2013
© 2013 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
FTA/FRA2C1(M,S)1 and FXA2C1(M,S)1
2 Audio Channels + 1 Contact Closure
SPECIFICATIONS
TYPICAL APPLICATIONS
ORDERING INFORMATION
Part Number Description Wavelength Fiber
Optical
Power Budget Max Distance
FTA2C1M1 2-Channel Audio Transmitter 1310 nm Multimode 62.5/125µm 16 dB 3 km (2.5 mi)
FRA2C1M1 2-Channel Audio Receiver 1310 nm Multimode 62.5/125µm 16 dB 3 km (2.5 mi)
FTA2C1S1 2-Channel Audio Transmitter 1310 nm Single mode 9/125µm 23 dB 48 km (30 mi)
FRA2C1S1 2-Channel Audio Receiver 1310 nm Single mode 9/125µm 23 dB 48 km (30 mi)
FXA2C1M1A 2-Channel Audio Transceiver “A” End 1310 nm/1550 nm Multimode 62.5/125µm 16 dB 3 km (2.5 mi)
FXA2C1M1B 2-Channel Audio Transceiver “B” End 1550 nm/1310 nm Multimode 62.5/125µm 16 dB 3 km (2.5 mi)
FXA2C1S1A 2-Channel Audio Transceiver “A” End 1310 nm/1550 nm Single mode 9/125µm 23 dB 48 km (30 mi)
FXA2C1S1B 2-Channel Audio Transceiver “B” End 1550 nm/1310 nm Single mode 9/125µm 23 dB 48 km (30 mi)
Included Accessories DC Plug-in Power Supply, 90-264 VAC, 50–60 Hz (Included)
Options [1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit - With Mounting Hardware (Optional, order model DINBKT1)
Note: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve
and advance technology, product specifications are subject to change without notice.
FTA2C1
FXA2C1
FRA2C1
FXA2C1
A
A
A
A
C
C
A
A
A
A
C
C
Audio
Input/Output Channels 2
Input/Output Signal 6 V pk-pk (+8.5 dBm)
Bandwidth 20 Hz – 20 kHz
Total Harmonic Distortion 0.01%
Signal-to-Noise Ratio (SNR) <90 dB (typical)
Contact
Interface Response Time: 3 msec
Input Dry Contact Closure
Output SPST Relay, 0.2 A, 36 VDC Max Contact Rating,
Normally Open
Number Of Fibers 1
LED Indicators Audio
Link
Contact Closure
Connectors
Power Terminal Block
Optical ST (Standard, other connectors available by request)
Audio Terminal Block
Contact Terminal Block
Power
Operating Voltage Range 8 to 15 VDC
Max Power Consumption 2 W
Electrical & Mechanical
Number of Rack Slots 1
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight <2 lbs/0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 5% to 95% (non-condensing)¹
LEGEND
COPPER
OPTICAL FIBER