Spec Sheet

SPECIFICATIONS
ORDERING INFORMATION
TYPICAL APPLICATION
Video
Video Input: 1 volt pk-pk (75 ohms)
Overload:: >1.5V pk-pk
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <2%
Differential Phase: <0.7˚
Tilt: <1%
Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to
maintain 6Mhz Bandwidth
Data
Data Interface: RS232, RS422, RS485 (2/4W), UTC (Up-the-Coax)
Data Format: NRZ, NRZI Manchester, Bi-phase and Sensornet
Data Rate: DC-250 Kbps (NRZ)
Contact
Input: Dry Contact Closures
Output: SPST Relay 0.5 Contact Rating
Wavelength 1310/1550 nm, MM and SM
Optical Emitter Laser Diode
LED Indicators – Link – Video – Data
– Contact In – Contact Out – Power
Connectors
Optical: 1 ST connector
Power: Terminal Block
Video: BNC (Gold Plated Center-Pin)
Data: Terminal Block
Contact: Terminal Block
Power
Operating Voltage: 8 to 15 VDC
Power Consumption: 5.25W
Electrical & Mechanical
Current Protection: Automatic Resettable Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H)
FVT/FVR110(M,S)1/M (Mini) 3.3 × 2.5 × 1.46 in (8.4 × 6.4 × 3.7 cm)
FVT/FVR110(M,S)1 (ComFit) 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight: <2 lb / 0.9 kg
Environmental
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)
1
Part Number Description
Fibers
Required Fiber
Optical
Power Budget
Maximum
Distance
# Rack
Slots
FVT110M1/M Mini Video Transmitter/Data Transceiver 1 Multimode
‡
– 62.5/125µm 16 dB 3 km (2 mi) N/A
FVT110M1 Video Transmitter/Data Transceiver 1 Multimode
‡
– 62.5/125µm 16 dB 3 km (2 mi) 1
FVR110M1 Video Receiver/Data Transceiver 1 Multimode
‡
– 62.5/125µm 16 dB 3 km (2 mi) 1
FVT110S1/M Mini Video Transmitter/Data Transceiver 1 Single Mode
‡
– 9/125µm 16 dB 48 km (30 mi) N/A
FVT110S1 Video Transmitter/Data Transceiver 1 Single Mode
‡
– 9/125µm 16 dB 48 km (30 mi) 1
FVR110S1 Video Receiver/Data Transceiver 1 Single Mode
‡
– 9/125µm 16 dB 48 km (30 mi) 1
Accessories
Options
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
[1] Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
FVT/FVR110(M,S)1[/M]
10-bit digitally encoded video with “Up-the-Coax” extended
distance or bi-directional data (RS232, RS422, RS485 2/4W)
1 Fiber
9/125µm SM
Up to 48 km
(30 miles)
FVT110S1/M FVR110S1
V
V
D
D
C
C
OPTICAL FIBER
VIDEO (Coax)
04 Aug 2014© 2014 Communication Networks. All Rights Reserved. “ComNet,” the “ComNet Logo,” “NetWave” and the “NetWave Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]