Data Sheet

SPECIFICATIONS
TYPICAL APPLICATION
Video
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
# Input/Output Channels: 4
Bandwidth (minimum): 10 Hz - 6.5 MHz per channel
Differential Gain: <2%
Differential Phase: <0.7˚
Tilt: <1%
Signal-to-Noise Ratio (SNR): 67 dB Typical
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to
maintain 6Mhz Bandwidth
Data
Data Channels: 2
Data Interface: RS232, RS422 and RS485 (2W/4W)
Data Format: NRZ, NRZI, Manchester, Bi-Phase and Sensornet
Data Rate: DC-250 Kbps (NRZ)
Bit Error Rate: <1 in 10-9 @ Maximum Optical Loss Budget
Operating Mode: Simplex or Full-Duplex
Contact Closure
Contact Interface: Response Time: 0.5 msec
Input: Dry Contact Closure
Output: SPST Relay, 0.5A Contact Rating normally open
Wavelength 1310/1550 nm, Multimode and Single Mode
Number Of Fibers 1
LED Indicators - Video Sync Presence for Each Video Channel
- Received Data - Transmitted Data
- Optical Carrier Detect
Optical Emitter Laser Diode
Connectors
Optical: ST
Power: Terminal Block
Video: BNC (Gold Plated Center-Pin)
Data: Terminal Block
Electrical & Mechanical
Power:
Surface Mount: 8-15 VDC @ 4W
Rack Mount: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State
Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 3.3 in., 15.5 × 13.5 × 8.3 cm
Shipping Weight: <2 lb./0.9 kg
Environmental
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)
†
†
May be extended to condensation conditions by adding suffix ‘/C’
to model number for conformal coating.
FVT/FVR4012(M,S)1
4-channel 10-bit digitally encoded video +
2 bi-directional data channels + 1 bi-directional contact closure
ORDERING INFORMATION
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended. Complies with FDA Performance Standard
for Laser Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
Part Number Description
Fibers
Required Fiber
Optical
Pwr Budget
Max
Distance
# Rack
Slots
FVT4012M1 Transmitter 4 Video / 2 Bi-directional Data / 1 Contact Closure
1
Multimode
62.5/125µm
16 dB 2 km (1.2 mi) 2
FVR4012M1 Receiver 4 Video / 2 Bi-directional Data / 1 Contact Closure
FVT4012S1 Transmitter 4 Video / 2 Bi-directional Data / 1 Contact Closure
1
Single Mode
9/125µm
23 dB 69 km (43 mi) 2
FVR4012S1 Receiver 4 Video / 2 Bi-directional Data / 1 Contact Closure
Accessories
Options
9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Add suffix ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)
13 Mar 2012© 2012 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [e-mail]
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: [phone] | F: [phone] | [e-mail]
1 Fiber
9/125µm SM
Up to 69 km
(43 miles)
FVR4012S1
FVT4012S1
D
C
D
C
22
VV
44