Data Sheet

specifications
02.16.12© 2012 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [e-mail]
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: [phone] | F: [phone] | [e-mail]
4-channel digital video + 4 bi-directional data
channels + 10-bit digital short-haul video
VIDEO
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
# Input/Output Channels: 4
Bandwidth (minimum): 10 Hz - 6.5 MHz per channel
Differential Gain: <2%
Differential Phase: <0.7˚
Tilt: <1%
Signal-to-Noise Ratio (SNR): 67 dB Typical
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to
maintain 6Mhz Bandwidth
DATA
Data Channels: 4
Data Interface: RS232, RS422 and RS485 (2W/4W)
Data Format: NRZ, NRZI, Manchester, Bi-Phase and Sensornet
Data Rate: DC-250 Kbps (NRZ)
Bit Error Rate: <1 in 10-9 @ Maximum Optical Loss Budget
Operating Mode: Simplex or Full-Duplex
WAVELENGTH 1310/1550 nm, Multimode and Single Mode
NUMBER OF FIBERS
1
LED INDICATORS - Video Sync Presence for Each Video Channel
- Received Data - Transmitted Data
- Optical Carrier Detect
OPTICAL EMITTER Laser Diode
Video Transmitter/Data Transceiver (1310/1550 nm)
Video Receiver/Data Transceiver (1550/1310 nm)
PART
NUMBER
# RACK
SLOTS
OPTICAL
PWR BUDGET
MAX.
DISTANCE
†
FVT4014M1
FVR4014M1
Multimode
62.5/125µm
2
DESCRIPTION
FIBER
2 km (1.2 miles)16 dB
Video Transmitter/Data Transceiver (1310/1550 nm)
Video Receiver/Data Transceiver (1550/1310 nm)
FVT4014S1
FVR4014S1
Single Mode
9/125µm
2
FIBERS
REQUIRED
1
1 69 km (43 miles)23 dB
CONNECTORS
Optical: ST
Power: Terminal Block
Video: BNC (Gold Plated Center-Pin)
Data: RJ45 (5 pcs. Included)
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 8-15 VDC @ 4W
Rack Mount: From Rack
Number of Rack Slots: 2
Current Protection: Automatic Resettable Solid-State
Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 2.2 in.,
(15.5 × 13.5 × 5.6 cm)
Shipping Weight: <2 lb./0.9 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)*
* May be extended to condensation conditions by adding suffix ‘/C’
to model number for conformal coating.
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended. † Distance may be limited by optical dispersion.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
OPTICAL FIBER
VIDEO (Coax)
1 Fiber
9/125µm SM
Up to 69 km
(43 miles)
V V
D D
FVT4014S1
FVR4014S1
4
4
4
4
FVT/FVR4014(M)(S)1
Accessories
Options
9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
(5) RJ45 - RJ45 Breakout Wiring Kit (Includes cable and terminal block)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)