Installation Manual

INS_FVT/FVR4014_REVA
05/10/10
PAGE 5
FIGURE 7 – DATA CONNECTIONS
See Page 4 for Switch Settings
RS232
Customer
Equipment
FVT4014
Customer
Equipment
FVR4014
RS422
Bi-phase or
Manchester
DOUT(+)
DOUT(-)
DIN(+)
DIN(-)
Data In (+)
Data In (-)
Data Out (+)
Data Out (-)
2-Wire
RS485,
Sensornet
DIN(+)
DIN(-)
DIN(+)
DIN(-)
Data (A)
Data (B)
Data (A)
Data (B)
Data Transmit
Data Receive
Signal Ground
DIN(-)
DOUT(-)
GND
DOUT(-)
DIN(-)
GND
Data Receive
Data Transmit
Signal Ground
4-Wire
RS485
DIN(+)
DIN(-)
DOUT(+)
DOUT(-)
DOUT(+)
DOUT(-)
DIN(+)
DIN(-)
Data Out (A)
Data Out (B)
Data In (A)
Data In (B)
Data In (A)
Data In (B)
Data Out (A)
Data Out (B)
DIN(+)
DIN(-)
DOUT(+)
DOUT(-)
DOUT(+)
DOUT(-)
DIN(+)
DIN(-)
Data Out (+)
Data Out (-)
Data In (+)
Data In (-)
Data In (+)
Data In (-)
Data Out (+)
Data Out (-)
FIGURE 8 – LED INDICATORS
LINK VIDEO DATA POWER
GREEN Communication link has An active video signal is An active data signal is Unit powered up
been established over present on the BNC present on the input pins
optical fiber connector. of the data connector.
RED Communication link has No video signal – –
not been established.
OFF Not powered up correctly – No data signal Unit powered down
TECH SUPPORT: 1.888.678.9427
INSTALLATION AND OPERATION MANUAL FVT/FVR4014