Data Sheet

LIFETIME WARRANTY WWW.COMNET.NET148
VIDEO
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
Bandwidth: 5 Hz - 6.5 MHz
Differential Gain: <2%
Differential Phase: < 0.7º
Tilt: <1%
Signal-to-Noise Ratio (SNR): 67 dB @ Maximum
Optical Loss Budget
DATA
Data Interface: RS232, RS422 and RS485 (2W/4W)
Data Format: NRZ, NRZI, Manchester, Bi-phase
and Sensornet
Data Rate: DC-250 Kbps (NRZ)
CONTACT (Replaces 1 Data Channel)
Contact Interface: Response time 0.5 msec
Input: Dry Contact Closure
Output: SPST Relay 0.5A Contact Rating –
normally open
WAVELENGTH 1310/1550 nm, MM and SM
NUMBER OF FIBERS 1 In/1 Out
OPTICAL EMITTER Laser Diode
LED INDICATORS
FVT Transmitter/Data Transceiver Unit: FVR Receiver/Data Transceiver Unit:
- Fiber Status - Fiber Status
- Video Input Sync Presence - Video Output Sync Presence
- Received Data - Received Data
- Transmitted Data - Transmitted Data
- Power - Power
CONNECTORS
Optical: 2 ST connectors for the Dual Port
configuration (Required for Daisy Chain
Self-Healing Ring operation)
Power: Terminal Block
Video: BNC (Gold Plated Center-Pin)
Data: RJ45
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 8-15 VDC @ 3W
Rack Mount: From Rack
Number of Rack Slots: 3
Current Protection: Automatic Resettable Solid-State
Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 3.3 in.,
(15.5 × 13.5 × 8.3 cm)
Shipping Weight: <2 lb./0.9 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)
†
†
May be extended to condensation conditions by adding suffix ‘/C’
to model number for conformal coating.
Video Transmitter/Data Transceiver
Video Receiver/Data Transceiver
PART
NUMBER
# RACK
SLOTS
OPTICAL
PWR BUDGET
MAX.
DISTANCE**
FVT4014M1SHR
FVR4014M1SHR
Multimode
62.5/125µm
3
DESCRIPTION
FIBER
2 km (1.2 miles)
16 dB
Video Transmitter/Data Transceiver
Video Receiver/Data Transceiver
FVT4014S1SHR
FVR4014S1SHR
Single Mode
9/125µm
3
FIBERS
REQUIRED
1 In/1 Out
1 In/1 Out
48 km (30 miles)
16 dB
NOTE: This product requires a fiber installation with a minimum 35 dB connector return loss. The use of Super Polish Connectors is recommended. **Distance may be limited by optical dispersion.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
Accessories
Options
9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
(5) RJ45 - RJ45 Breakout Wiring Kit (Includes cable and terminal block)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
(4) 10-bit digital video channels + 4 bi-directional data channels/
daisy chain 8 video channels on one optical fiber/dual optical port
self-healing ring configuration/single fiber operation
Self-Healing Ring
specifications
FVT/FVR4014(M)(S)1SHR
SELF-HEALING RING