Data Sheet

SPECIFICATIONS
Video
Video Input 1 volt pk-pk (75 ohms)
Overload >1.5 V pk-pk
# Input/Output Channels 4
Bandwidth (minimum) 10 Hz - 6.5 MHz
Differential Gain <4%
Dif fer ential Phase <0.7˚
Tilt <1%
Signal-to-Noise Ratio (SNR) 57 dB Typical
Max. RG-59 COAX Distance 100m (300 ft) Camera to Fiber Optic Module to
maintain 6Mhz Bandwidth
Wavelength 1310 nm, Multimode and Single Mode
Number of Fibers 1
Connectors
Optical ST
Power Terminal Block
Video BNC (Gold Plated Center-Pin)
LED Indicators › Video Present › Optical Carrier Detect › Power
Power
Surface Mount 8 to 15 VDC
Power Consumption 3 W
Rack Mount From Rack
Electrical & Mechanical
Number of Rack Slots 1
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight 2 lb./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹
ValueLine
FVT/FVR41(M,S)1
4-Channel Digitally Encoded Video Multiplexer
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description
Fibers
Required Fiber
Optical PWR
Budget Max Distance²
# Rack
Slots
FVT41M1 4-Channel Video Transmitter (1310 nm)
1 Multimode 62.5/125µm 16 dB 2 km (1.2 miles) 1
FVR41M1 4-Channel Video Receiver (1310 nm)
FVT41S1 4-Channel Video Transmitter (1310 nm)
1 Single Mode 9/125µm 23 dB 69 km (43 miles) 1
FVR41S1 4-Channel Video Receiver (1310 nm)
Accessories DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Options [2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
[2] Distance may be limited by optical dispersion.
OPTICAL FIBER
VIDEO (Coax)
1 Fiber
V V
FVT41S1
FVT41S1
4 4
04 Feb 2015© 2015 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]