Data Sheet

specifications
11.12.10© 2010 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [e-mail]
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: [phone] | F: [phone] | [e-mail]
AUDIO
# Input/Output Channels: 4 (balanced)
Audio Input/Output Signal: 4.4 volt pk-pk (+6dBm)
Bandwidth: 20Hz - 18kHz
Total Harmonic Distortion: 0.05%
Signal-to-Noise Ratio (SNR): 85dB (Typical)
CONTACT
Contact Interface: Response Time: 0.5 msec
Input: Dry Contact Closure
Output: SPST Relay, 0.5 A Contact Rating - normally open
WAVELENGTH 1310 nm/1550 nm, Multimode and Single Mode
NUMBER OF FIBERS 1
LED INDICATORS - Link - Audio Channels 1-4
- Contact Closure - Power
CONNECTORS
Optical: ST
Power: Terminal Block
Audio: Terminal Block
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 8-15 VDC @ 2 W
Rack Mount: From Rack
Number of Rack Slots: 1
Current Protection: Automatic Resettable
Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 1.1 in.,
(15.5 × 13.5 × 2.8 cm)
Shipping Weight: <2 lb./0.9 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)
†
†
May be extended to condensation conditions by adding suffix ‘/C’
to model number for conformal coating.
# RACK
SLOTS
OPTICAL
PWR BUDGET
MAX.
DISTANCE
‡
FIBERS
REQUIRED
DESCRIPTION
FIBER
4 Channel Audio Transmitter (1310 nm/1550 nm)
4 Channel Audio Receiver (1310 nm/1550 nm)
FVTXA4C1M
FVRXA4C1M
Multimode
62.5/125µm
11 3 km (2.5 miles)16 dB
4 Channel Audio Transmitter (1310 nm/1550 nm)
4 Channel Audio Receiver (1310 nm/1550 nm)
FVTXA4C1S
FVRXA4C1S
Single Mode
9/125µm
148 km (30 miles)16 dB
1
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
‡
Distance may be limited by optical dispersion.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
4-channel 24-bit audio multiplexer
+ one bi-directional contact closure
OPTICAL FIBER
1 Fiber
9/125µm SM
Up to 48 km
(30 miles)
A A
C C
FVTXA4C1S1
FVRXA4C1S1
4
4
4
4
FVT/FVRXA4C1(M)(S)
PART
NUMBER
MADE IN THE
USA
Accessories
Options
9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)