Data Sheet
26 Jun 2014
© 2014 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
INFO@COMNET.NET
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: +44 (0)113 307 6400
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
FVT/FVR10C1(M,S)1[/M],
FVR20C2(M,S)2, and FVR40C4(M,S)4
Single, Dual or Quad-Channel 10-Bit Digitally Encoded
Short-Haul Video and Contact Closure
SPECIFICATIONS
TYPICAL APPLICATION
ORDERING INFORMATION
Video
1
Video Input 1 volt pk-pk (75 ohms)
Overload >1.5V pk-pk
Bandwidth 5 Hz - 10 MHz
Differential Gain <2%
Differential Phase <0.7º
Tilt <1%
Signal-to-Noise Ratio (SNR) >60 dB typical @ Max. Optical Loss Budget
Max. RG-59 COAX 100m (300ft) Camera to Fiber Optic Module to
maintain bandwidth
Contact
Interface Response time 0.5msec
Input Dry Contact Closure
Output SPST Relay, 0.5A Contact Rating - normally open
Optics
Wavelength 1310 nm, MM and SM
Optical Emitter Laser Diode
Number of Fibers 1, 2 or 4 (see table below)
Connectors
Optical ST
Power Terminal Block
Video BNC
Contact Terminal Block
LED Indicators – Video – Contact – Link (Receivers only)
Power
Operating Voltage Range FVT10C1(M,S)1/M: 9 – 36VDC or 12 – 24 VAC
ComFit units: 8 to 15VDC
Power Consumption 2W (1 & 2 Channel Version)
4W (4 Channel Version)
Electrical & Mechanical
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (FVT10C1(M,S)1/M) 4.5 × 2.2 × 1.1 in (11.7 × 5.5 × 2.7 cm)
Size (ComFit Units) 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight 2 lb./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)
2
OPTICAL FIBER
VIDEO (Coax)
CONTACT
Part Number Description
Fibers
Required Fiber
Optical
Power Budget
Maximum
Distance
3
# Rack
Slots
FVT10C1M1/M Mini Video Transmitter 1 Multimode – 62.5/125µm 12 dB 4 km (2.5 mi) N/A
FVT10C1S1/M Mini Video Transmitter 1 Single Mode – 9/125µm 16 dB 54 km (33 mi) N/A
FVT10C1M1 1-Channel ComFit Video/Contact Transmitter 1 Multimode – 62.5/125µm 12 dB 4 km (2.5 mi) 1
FVT10C1S1 1-Channel ComFit Video/Contact Transmitter 1 Single Mode – 9/125µm 16 dB 54 km (33 mi) 1
FVR10C1M1 1-Channel ComFit Video/Contact Receiver 1 Multimode – 62.5/125µm 12 dB 4 km (2.5 mi) 1
FVR10C1S1 1-Channel ComFit Video/Contact Receiver 1 Single Mode – 9/125µm 16 dB 54 km (33 mi) 1
FVR20C2M2 2-Channel ComFit Video/Contact Receiver 2 Multimode – 62.5/125µm 12 dB 4 km (2.5 mi) 1
FVR20C2S2 2-Channel ComFit Video/Contact Receiver 2 Single Mode – 9/125µm 16 dB 54 km (33 mi) 1
FVR40C4M4 4-Channel ComFit Video/Contact Receiver 4 Multimode – 62.5/125µm 12 dB 4 km (2.5 mi) 1
FVR40C4S4 4-Channel ComFit Video/Contact Receiver 4 Single Mode – 9/125µm 16 dB 54 km (33 mi) 1
Accessories DC Plug-in Power Supply (Included)
Mounting Bracket (Included with FVT10C1(M,S)1/M mini transmitter only)
Options 12-inch Coax Jumper (Optional, consult factory)
[2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
NOTE: This product requires a fiber installation with a minimum 30 dB
connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code
of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product
specifications are subject to change without notice.
[3] Transmission distance will be diminished if additional losses are introduced
by the optical connectors, splices and other factors regarding the quality of
the fiber. Operating distance of multimode is limited by the characteristics
of the fiber bandwidth. For additional information or support, contact the
ComNet Applications Engineering Department.
FVT10C1S1/M
FVT10C1S1/M
FVR20C2S2
V
V
C
C
V
C
2
2


