Installation Manual

ManualsBrandsComnet ManualsElectronicsSingle-Channel ComFit Single Mode Video Transmitter

INS_FVTFVR(1,2,4)0C(1,2,4)(M,S)(1,2,4)[M]_REV- Rev. 06.30.14 PAGE

TECH SUPPORT: 1.888.678.9427

The ComNet

™

series video transmitters and receivers support the transmission of one,

two, or four independent short-haul quality 10-bit digital video signals and one, two,

or four contact closures in the direction of the video over multimode or single mode

optical fibers. These modules are universally compatible with major CCTV camera

manufacturers. The receivers are compatible with the FVT1(M,S)1/M* series single

channel transmitters. Plug-and-play design ensures ease of installation and no electrical

or optical adjustments are ever required.

Bi-color (Red/Green) LED indicators are provided for rapidly confirming operating

status. Please see Figure 10 on Page 7 for LED explanations.

The FVT10C1(M,S)1/M units have a small footprint and are ideal for mounting where

space is limited or can be mounted inside equipment housing. The remaining ComFit

units may be either wall or rack-mounted. Please see Figures A and B on Page 8 for

mounting instructions.

* FVT1(M,S)1/M not available in North America.

INSTALLATION AND OPERATION MANUAL

FVT/FVR10C1(M,S)1[/M],

FVR20C2(M,S)2 & FVR40C4(M,S)4

SINGLE, DUAL OR QUAD-CHANNEL 10-BIT DIGITALLY ENCODED

SHORT-HAUL VIDEO AND CONTACT CLOSURE

This manual serves the following

ComNet Model Numbers:

FV T10C1M1/M

FV T10C1S1/M

FV T10C1M1

F V T10C1S1

FVR10C1M1

F VR10C1S1

FVR20C2M2

FVR20C2S2

FVR40C4M4

FVR40C4S4

Summary of content (8 pages)

PAGE 1
INSTALLATION AND OPERATION MANUAL FVT/FVR10C1(M,S)1[/M], FVR20C2(M,S)2 & FVR40C4(M,S)4 SINGLE, DUAL OR QUAD-CHANNEL 10-BIT DIGITALLY ENCODED SHORT-HAUL VIDEO AND CONTACT CLOSURE This manual serves the following ComNet Model Numbers: FVT10C1M1/M FVT10C1S1/M FVT10C1M1 FVT10C1S1 FVR10C1M1 FVR10C1S1 FVR20C2M2 FVR20C2S2 FVR40C4M4 FVR40C4S4 The ComNet™ series video transmitters and receivers support the transmission of one, two, or four independent short-haul quality 10-bit digital video signals and one, two,
PAGE 2
INSTALLATION AND OPERATION MANUAL FVT/FVR10C1(M,S)1[/M], FVR20C2(M,S)2 & FVR40C4(M,S)4 FIGURE 1 – FVT10C1/M TRANSMITTER Power Supply: 9 – 36VDC @ 2W OR 12 – 24 VAC @ 2W Power Input & Contact Closure BNC Video Multimode or Single Mode Optical Fiber FIGURE 2 – FVT10C1/M TRANSMITTER FRONT PANEL REAR PANEL TECH SUPPORT: 1.888.678.9427 Mounting Bracket (Included) INS_FVTFVR(1,2,4)0C(1,2,4)(M,S)(1,2,4)[M]_REV- Rev. 06.30.
PAGE 3
INSTALLATION AND OPERATION MANUAL FVT/FVR10C1(M,S)1[/M], FVR20C2(M,S)2 & FVR40C4(M,S)4 FIGURE 2 – FVT10C1 TRANSMITTER Multimode or Single Mode Optical Fiber Video Signal In Contact In Black Black With White Stripe Power Supply: Surface Mount: 8 – 15VDC @ 2W Rack Mount: From Rack FIGURE 3 – FVT10C1 TRANSMITTER FRONT PANEL TECH SUPPORT: 1.888.678.9427 NOTE: R emove Electrical Connector for Rack Mount Units REAR PANEL INS_FVTFVR(1,2,4)0C(1,2,4)(M,S)(1,2,4)[M]_REV- Rev. 06.30.
PAGE 4
INSTALLATION AND OPERATION MANUAL FVT/FVR10C1(M,S)1[/M], FVR20C2(M,S)2 & FVR40C4(M,S)4 FIGURE 4 – FVR10C1 RECEIVER Video Signal Out Contact Out Multimode or Single Mode Optical Fiber Black Black With White Stripe Power Supply: Surface Mount: 8 – 15VDC @ 2W Rack Mount: From Rack FIGURE 5 – FVR10C1 RECEIVER FRONT PANEL TECH SUPPORT: 1.888.678.9427 NOTE: R emove Electrical Connector for Rack Mount Units REAR PANEL INS_FVTFVR(1,2,4)0C(1,2,4)(M,S)(1,2,4)[M]_REV- Rev. 06.30.
PAGE 5
INSTALLATION AND OPERATION MANUAL FVT/FVR10C1(M,S)1[/M], FVR20C2(M,S)2 & FVR40C4(M,S)4 CHANNEL 1 FIGURE 6 – FVR20C2 RECEIVER Video Signal Out Contact Out CHANNEL 2 Multimode or Single Mode Optical Fiber Video Signal Out Contact Out Black Black With White Stripe Power Supply: Surface Mount: 8 – 15VDC @ 2W Rack Mount: From Rack FIGURE 7 – FVR20C2 RECEIVER FRONT PANEL TECH SUPPORT: 1.888.678.
PAGE 6
INSTALLATION AND OPERATION MANUAL FVT/FVR10C1(M,S)1[/M], FVR20C2(M,S)2 & FVR40C4(M,S)4 FIGURE 8 – FVR40C4 RECEIVER CH1 Video Signal Out CH2 Video Signal Out Multimode or Single Mode Optical Fiber CH3 Video Signal Out Contact Out Contact Out CH4 Video Signal Out Black Black With White Stripe Operating Voltage Range: 8 to 15VDC Power Consumption: 4W NOTE: R emove Electrical Connector for Rack Mount Units FIGURE 9 – FVR40C4 RECEIVER FRONT PANEL TECH SUPPORT: 1.888.678.
PAGE 7
INSTALLATION AND OPERATION MANUAL FVT/FVR10C1(M,S)1[/M], FVR20C2(M,S)2 & FVR40C4(M,S)4 FIGURE 10 – LED INDICATORS LINK (RECEIVERS ONLY) VIDEO CONTACT* GREEN Communication link has been established over optical fiber Video signal is present on the channel. Contact input is closed. RED Communication link has not been established. Video signal is not present on the channel. – OFF Unit powered down. Unit powered down. Contact input is open.
PAGE 8
INSTALLATION AND OPERATION MANUAL FVT/FVR10C1(M,S)1[/M], FVR20C2(M,S)2 & FVR40C4(M,S)4 FIGURE A INSTALLATION CONSIDERATIONS The FVT10C1(M,S)1/M is supplied as a Standalone/Surface Mount module. Dimensions are for a ComNet™ FVT10C1/M module The remaining units covered in this manual are supplied as Standalone/ Rack (ComFIt) modules. Units should be installed in dry locations protected from extremes of temperature and humidity. 2.2in (5.