Installation Manual

INS_FVT11MAC_REV–

03/08/10

PAGE 1

INSTALLATION AND OPERATION MANUAL

FVT11MAC

Single Channel Mini Video Transmitter

24VAC Transformer Isolated

The FVT11MAC video mini-transmitter supports transmission of a fixed video

signal using AM (amplitude modulation) on one multimode fiber optic cable. The

FVT11MAC video transmitter is compatible with the FVR11M, FVR10M, FVR21,

and FVR22 receivers. Installation requires no electrical or optical adjustments.

The transmitter incorporates a bi-color (Red/Green) indicating LED for monitoring

proper system operation.

The unit operates on 24VAC power.

The FVT11MAC mini unit operates as a standalone module only.

See Figures 1 – 3 for complete installation details.

PAGE 1
INSTALLATION AND OPERATION MANUAL FVT11MAC Single Channel Mini Video Transmitter 24VAC Transformer Isolated The FVT11MAC video mini-transmitter supports transmission of a fixed video signal using AM (amplitude modulation) on one multimode fiber optic cable. The FVT11MAC video transmitter is compatible with the FVR11M, FVR10M, FVR21, and FVR22 receivers. Installation requires no electrical or optical adjustments.
PAGE 2
INSTALLATION AND OPERATION MANUAL FVT11MAC FIGURE 1 – FVT11MAC 24VAC INPUT ACH ACL MULTIMODE OPTICAL FIBER FIGURE 2 – FVT11MAC FRONT PANEL FIGURE 3 – LED INDICATOR REAR PANEL VIDEO PRESENT TECH SUPPORT: 1.888.678.9427 GREEN A Video signal is present. RED No Video signal is present. OFF Unit not powered up.
PAGE 3
MECHANICAL INSTALLATION INSTRUCTIONS INSTALLATION CONSIDERATIONS This fiber-optic link is supplied as a Standalone/Rack module. Units should be installed in dry locations protected from extremes of temperature and humidity.