Data Sheet

specifications
07.17.12
© 2012 Communications Networks Corporation. All Rights Reserved. “ComNet” and the
“ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [e-mail]
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: [phone] | F: [phone] | [e-mail]
8-bit digitally encoded video mini transmitter
with contact closureFVT1C1B(M)(S)1-M
VIDEO
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
Bandwidth: 5 Hz - 8 MHz
Differential Gain: <2%
Differential Phase: <2º
Tilt: <0.5%
Signal-to-Noise Ratio (SNR): 60 dB @ Maximum Optical Loss Budget
CONTACT
Interface: Response Time: 0.5 msec
Input: Dry Contact Closure
(0-3.3V, 1mA max. @ 0VDC)
CONNECTORS
Optical: ST
Power: 2.1mm Center Positive Plug
Video: BNC
Contact: Screw Terminal Block
WAVELENGTH 1310 nm
NUMBER OF FIBERS 1
LED INDICATOR - Power - Video (Sync Presence for each
Video Channel)
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 5 VDC @ 0.25A
Circuit Board: Meets IPC Standard
Surface Mount (L × W × H): 3.3 × 2.5 × 1.1 in.,
(8.4× 6.4 × 2.8 cm)
Shipping Weight: <1 lb./0.45 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)*
* May be extended to condensation conditions by adding suffix ‘/C’
to model number for conformal coating.
PART
NUMBER
OPTICAL
PWR BUDGET
MAX.
DISTANCE
†
FIBERS
REQUIRED
DESCRIPTION
FIBER
Video Transmitter (1310 nm)
FVT1C1BM1-M
Multimode
62.5/125µm
1 4 km (2.5 miles)12 dB
Accessories
Options
5 VDC Power Supply, 90 – 249VAC 50/60Hz (Included)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
Video Transmitter (1310 nm)FVT1C1BS1-M
Single Mode
9/125µm
54 km (33 miles)
16 dB
1
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
† Transmission distance will be diminished if additional losses are introduced by the optical connectors, splices and other factors regarding the quality of the fiber. Operating dis-
tance of multimode is limited by the characteristics of the fiber bandwidth. For additional information or support, contact the ComNet Applications Engineering Department.
OPTICAL FIBER
VIDEO (Coax)
4 Fibers
62.5/125µm MM
Up to 4 km
(2.5 miles)
CV
CV
CV
CV
V
C
FVT1C1BM1-M
FVT1C1BM1-M
FVT1C1BM1-M
FVT1C1BM1-M
FVR4C4BM4
4
4