Installation Manual

ManualsBrandsComnet ManualsElectronicsHDMI Multi-Mode Fiber Optic Transmitter Small-Size

INS_FVT/FVR(X)MI[/M]_REV– 04/20/12 PAGE 1

INSTALLATION AND OPERATION MANUAL

FVT/FVR(X)MI[/M]

HD DIGITAL VISUAL INTERFACE MULTIMODE

FIBER LINK WITH HDCP / EDID / CEC

The ComNet

™

FVT/FVR(X)MI[/M] features an HDMI

™

fiber link for uncompressed

high-resolution bi-directional communication with full HDCP copyright protection,

EDID and CEC connection functionality. The high-resolution signal is transmitted over

one multimode fiber using multiple wavelengths up to 1000m. Resolutions of up

to 1080p60 are supported. HDCP encryption is not affected or compromised by the

FVT/FVR(X)MI units.

The FVT/FVR(X)MI transmits pixel-for-pixel images and full 24-bit scan rate

with no contouring or bit reduction. This unit is fully compatible with HDMI

™

compliant sources and monitors, supporting all possible horizontal and vertical

sync configurations. The CEC support provided by these units allows the user to

communicate with up to ten CEC-enabled devices connected via HDMI

™

A locking HDMI

™

screw prevents the connectors from accidental disconnection.

Packaged in either a small stand-alone housing or the exclusive ComNet ComFit

housing, the FVT/FVR(X)MI standard size product may be either wall or rack-

mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1

adaptor plate.

Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment

operating status. Figure 12 on Page 6 describes the indicators for each light on the unit.

The FVT/FVR(X)MI standard size (ComFit) unit is interchangeable between stand-alone or

card mount configurations, or may be DIN-rail mounted by the addition of ComNet

model DINBKT1 adaptor plate. The FVT1MI/M has a small footprint, making it suitable

for shelf- or wall-mounting where space is at a premium. See Figure A on Page 7 for

mounting instructions.

This manual serves the following

ComNet Model Numbers:

FV T1MI

FVR1MI

FVT2MI

FVR2MI

FVTRMI

FVT1MI/M

FVR1MI/M

Summary of content (7 pages)

PAGE 1
INSTALLATION AND OPERATION MANUAL FVT/FVR(X)MI[/M] HD Digital Visual Interface multimode fiber link with HDCP / EDID / CEC This manual serves the following ComNet Model Numbers: FVT1MI FVR1MI FVT2MI FVR2MI FVTRMI FVT1MI/M FVR1MI/M The ComNet™ FVT/FVR(X)MI[/M] features an HDMI™ fiber link for uncompressed high-resolution bi-directional communication with full HDCP copyright protection, EDID and CEC connection functionality.
PAGE 2
FVT/FVR(X)MI[/M] FIGURE 1 – FVT/FVR1MI SINGLE FIBER FVR1MI 1 CH HDMI RECEIVER FIBER HDMI OUT MULTIMODE VID OPTICAL TX RX FIBER LNK BLACK BLACK WITH WHITE STRIPE GND +Vin Power Supply: Surface Mount: 8-15 VDC @ 0.
PAGE 3
D FVR2MI 2 CH HDMI RECEIVER FIBER HDMI OUT MULTIMODE LNK VID OPTICAL RX FIBER HDMI OUT FIBER TX LNK VID TX RX BLACK BLACK WITH WHITE STRIPE GND +Vin Power Supply: Surface Mount: 8-15 VDC @ 0.
PAGE 4
INSTALLATION AND OPERATION MANUAL FVT/FVR(X)MI[/M] FIGURE 7 – FVTRMI TRANSCEIVER FVTRMI 1 CH HDMI TX 1 CH HDMI RX TX FIBER HDMI IN MULTIMODE LNK VID OPTICAL RX FIBER HDMI OUT RX FIBER TX LNK VID TX RX BLACK BLACK WITH WHITE STRIPE GND +Vin Power Supply: Surface Mount: 8-15 VDC @ 0.
PAGE 5
INSTALLATION AND OPERATION MANUAL FVT/FVR(X)MI[/M] FIGURE 9 – FVR1MI/M MINI SINGLE FIBER RECEIVER FVR1MI/M 1 CHANNEL HDMI MINI RECEIVER TM FIBER LINK VIDEO MULTIMODE OPTICAL FIBER HDMI OUT BLACK BLACK W/ WHITE STRIPE GND +Vin RX TX Power Supply: 8-15 VDC @ 0.125A FIGURE 10 – FVT1MI/M MINI SINGLE FIBER TRANSMITTER FVT1MI/M 1 CHANNEL HDMI MINI TRANSMITTER TM FIBER MULTIMODE OPTICAL FIBER LINK VIDEO HDMI OUT BLACK BLACK W/ WHITE STRIPE GND +Vin RX TX Power Supply: 8-15 VDC @ 0.
PAGE 6
INSTALLATION AND OPERATION MANUAL FVT/FVR(X)MI[/M] FIGURE 12 – LED INDICATORS SOLID GREEN LINK VIDEO TX RX Communication link has Sink Power On Source Cable OK Sink Cable OK N/A N/A N/A Sink Power Off Source Cable Disconnected Sink Cable Disconnected been established over optical fiber FLASH GREEN Communication link has not been established over optical fiber OFF Unit powered down. NOTE: “Source” refers to the HDMI™ Input (e.g. Blu-Ray player, Camera or Set Top Box).
PAGE 7
MECHANICAL INSTALLATION INSTRUCTIONS Installation Considerations This fiber-optic link is supplied as a Standalone/Rack module. Units should be installed in dry locations protected from extremes of temperature and humidity. Figure A Dimensions are for a standard ComNet™ one slot module .156 [3.