Data Sheet

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
2-channel digital video + 4 bi-directional data
channels + 10-bit digital short-haul video
Description
The ComNet™ FVT/FVR2014 video transmitter/data
transceiver and video receiver/data transceiver series
utilize 10-bit digital encoding and decoding for high-
quality video transmission that meets the requirements
of EIA RS-250C for short-haul video transmission.
These environmentally hardened units provide
transmission of two independent video channels and
four bi-directional data channels over one optical fiber
and are ideal for use in unconditioned roadside or
out-of-plant installations. These units are completely
transparent to and universally compatible with any
NTSC, PAL, or SECAM CCTV camera systems, data
channels can be set independently for RS232, RS422
and 2 or 4-wire RS485 with tri-state support. Plug-
and-play design ensures ease of installation and no
electrical or optical adjustments are ever required.
Bi-color (Red/Green) LED indicators are provided for
rapidly ascertaining equipment operating status.
Packaged in the exclusive ComNet ComFit housing,
these units may be either wall or rack-mounted, or may
be DIN-rail mounted by the addition of ComNet model
DINBKT1 adaptor plate.
V
2
D
4
Features
- 10-bit digital video transmission: transmits 2 real-time
color video signals and 4 bi-directional data signals on
one optical fiber
- Supports RS232, RS422, and 2 or 4-wire RS485 with
tri-state data interfaces
- Exceeds all requirements for EIA RS-250C short-haul
transmission: Extremely high video performance
- Exceptionally low video distortion with zero
Performance Variation vs. Optical Path Loss
- Ideally suited to networks requiring multiple physical
layers where video degradation may be a problem
- Compatible with all NTSC, PAL, or SECAM CCTV
camera systems
- Tested and certified by an independent laboratory for
full compliance with the environmental requirements
(ambient operating temperature, mechanical shock,
vibration, humidity with condensation, high-line/low-line
voltage conditions and transient voltage protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment.
- Voltage transient protection on all power and signal
input/output lines provides unconditional protection
from power surges and other voltage transient events.
- Robust design ensures extremely high reliability in
unconditioned out-of-plant environments
- Bi-color (Red/Green) LED status indicators provide
rapid indication of critical operating parameters
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use
– ComFit
- Lifetime Warranty
FVT/FVR2014(M)(S)1
Applications
- High-Performance CCTV (Fixed Video)