Data Sheet

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› 802.11a/n Compliant

› RF Spectrum Survey Tools

› Antenna Alignment Tools

› Passive PoE Support

› Secure transmission: WPA2 – AES or TKIP encryption

› ComNet Antenna alignment feature eases installation

and setup

› Distance adjustments allow for short- or long- range

transmission

› ETSI Standards (EU Region only):

– DFS Dynamic Frequency Selection

– TPC Transmit Power Control

› Meets class IP67 dust and water immersion protection

standards

› Environmentally Hardened -40º to +75ºC

› Optional Antenna Configurations Available

› Lifetime Warranty

The NetWave

industrially hardened wireless Ethernet transmission link from

ComNet

™

can be configured through the embedded User Interface as a Client or as

an Access Point. This point-to-multipoint model allows multiple Ethernet endpoints

to be connected to a central Access Point. Up to 15 endpoints can be linked to a

central access point. The NW1 and NW2 support up to 95Mbps throughput using

MIMO technology. An easy to read LED array displays unit operational status along

with received signal strength ensuring optimal installation and operation. The

units are passive powered by PoE (Power over Ethernet) through a supplied power

injection module. The NW1 is FCC certified for use in North America and the NW2

is ETSI, DFS and TPC certified for use in the European Union.

NW1/NW2

Industrially Hardened Point-to-Multipoint

Wireless Ethernet Link

1IP67HARDENEDINCLUDED

PAGE 1
Industrially Hardened Point-to-Multipoint Wireless Ethernet Link NW1/NW2 INCLUDED HARDENED IP67 1 The NetWave® industrially hardened wireless Ethernet transmission link from ComNet™ can be configured through the embedded User Interface as a Client or as an Access Point. This point-to-multipoint model allows multiple Ethernet endpoints to be connected to a central Access Point. Up to 15 endpoints can be linked to a central access point.
PAGE 2
Industrially Hardened Point-to-Multipoint Wireless Ethernet Link NW1/NW2 SPECIFICATIONS Wireless Radio LEDs Power On, Ethernet Link, Signal Strength, EIRP NW1 (FCC): +35dBm NW2 (ETSI): +30dBm RF Output +26dBm Rated Transmitter Operational Frequency NW1: FCC UNII3 5745-5825MHz NW2: 5500-5700MHz supporting 802.