Users Manual

INSTALLATION AND OPERATION MANUAL
NETWAvE
INS_NetWave_REV– 06/10/13 PAGE
12
6.0 Detailed Configuration
Getting Started
To access the NetWave configuration interface, perform the following steps:
1. Connect an Ethernet cable from the Data In port on the Midspan Injector or Port 2 on the
radio directly to your laptop.
2. If you are using a Midspan Power Injector, Connect the power cable to an outlet and turn on
power.
3. Assign the Ethernet adapter on your computer with a static IP address on the 192.168.1.x
network, e.g. 192.168.10.10 and with a subnet mask 255.255.255.0.
4. Launch a web browser and enter the default IP address of the device, 192.168.10.101, into the
address bar.
The first page that you see is the login page. The words on the top left denote the hardware part
number and the firmware build version e.g. NW7 NW7_v1.78.0
The loginpageis presented upon requesting the Netwave Radio’s IP address.
The default authorization details are:
Username: admin
Password: admin