Instruction Manual

INS_NetWave_REV– 06/10/13 PAGE 14
INSTALLATION AND OPERATION MANUAL NETWAvE
TECH SUPPORT: 1.888.678.9427
8.2 Operating Modes
The Netwave Radio can operate in the following modes:
1. Access Point WDS
2. Client WDS
Once configured as Access Point and Client units can link together to form either Point-to-Point or
Point-to-Multipoint topologies.
8.3 Buttons and Alerts
The buttons are described here.
Reset Undo the changes.
Save Saves the changes but does not take effect till settings are applied
Save & Apply Saves and applies the changes.
Please use this button instead of the 'Save' button so that the
changes would be applied immediately.
It is recommended to click this button before moving to a different
page.
Logout Logs out of the device's web page.
Note: At the top right corner of the NetWave configuration web page, there may be either of the
following texts displayed:
Changes: 0: Means that all changes on the configuration web page have been applied to
the Wireless Device.
Unsaved Changes: Shows the number of changes that have not yet been Save & Apply.