Instruction Manual

INS_NetWave_REV– 06/10/13 PAGE 28
INSTALLATION AND OPERATION MANUAL NETWAvE
TECH SUPPORT: 1.888.678.9427
10.3 Administration
Within the System » Administration page, you can configure the Device Password, SSH, Telnet,
Web, and FTP settings.
10.3.1 Device Password
Figure 23: Setting the router password.
Password Allows you to set the device password, the default being admin
Confirmation Requires you to re-enter the password.
10.3.2 SSH
Figure 24: SSH settings in the System » Administration page.
SSH Allows you to access the device's Linux shell and file system using the Secure
Shell protocol. For example, the programs PuTTY and WinSCP can be used.
Interface Lets the device listen on a given interface or all interfaces.
Port Specifies the listening port, the default being 22.
Password
authentication
Allows SSH password authentication.
Allow root logins
with password
This is enabled by default.
Gateway ports Allow remote hosts to connect to local SSH forwarded ports.