Instruction Manual

INS_NetWave_REV– 06/10/13 PAGE 7
INSTALLATION AND OPERATION MANUAL NETWAvE
TECH SUPPORT: 1.888.678.9427
2.0 Point to Multi-Point
These individual units allow the user to configure for either multipoint access point or client operation.
There is a MAC address lock feature that can be enabled through the user interface but is not enabled
by default. The NW(1,2) includes a 19dBi 17° internal antenna. See the ComNet website for the
latest information regarding antenna support. Preconfigured NWK kits do not support point-to-
multipoint topologies.
PC NVR ComNet Gigabit
Managed Switch
with 30W PoE+
NW1
(Recommended
Access Point)
PoE
WIRELESS
CAT5
POWER
ETHERNET DATA
LEGEND
10/100 Ethernet
NW1 (Client)
PoE
PIM or other
PSE device
Power
IP Camera
Ethernet Ethernet
NW1 (Client)
PoE
PIM or other
PSE device
Power
IP Camera
Ethernet Ethernet
NW1 (Client)
PoE
PIM or other
PSE device
Power
IP Camera
Ethernet Ethernet
3.0 Point-to-Point Topology Utilizing Dual Ports
Power
NW1
(Client)
NW1
(Access Point)
ComNet Managed
Switch with 30W PoE
Connected to Network
IP Camera
IP Camera
Power
P1
P2
PoE
10/100 Mbps
Ethernet
PoE
Ethernet
Ethernet
Ethernet
PIM or other
PSE device