Brochure

ManualsBrandsCOMNET ManualsComputersNetWave Ultra-High Throughput Wireless Ethernet Transmitter

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› Up to 500 Mbps throughput

› Lifetime Warranty

› Sturdy cast aluminum enclosure

› IEEE802.3at PoE Compliant PD

› Over current protection and 3 layers of Ethernet surge

suppression on the PD port

› 802.11ac Compliant

› Distances up to 2 mi (FCC) or 2km (ETSI)

› Distances up to 4 mi (FCC) with MAC Lock enabled

› Environmentally Hardened -40º to +70ºC

› Meets class IP67 dust and water immersion protection

standards

› ETSI Standards (EU Region only):

– DFS Dynamic Frequency Selection

– TPC Transmit Power Control

› Secure transmission: WPA2 – AES or TKIP encryption

› ComNet Antenna alignment feature eases installation

and setup

› RF Spectrum Survey Tools

› Antenna Alignment Tools

› LED array displays unit operational status along with received

signal strength

APPLICATIONS

› High Throughput Back Haul Link for installations that require

connecting to more than one Ethernet device

› Ideal for PoE Camera connectivity

› Simple to deploy and cost-effective alternative to physical

connections to Ethernet edge equipment

› Integration of Ethernet where right-of-way issues mandate

wireless communications

› ITS traffic signalization networks and Video Detection

Systems (VDS)

› Multicast traffic-based video systems

› ITS roadside and city center CCTV surveillance, and

surveillance of high-value or mission-critical assets

› Wireless communications in manufacturing, petrochemical

refineries, wastewater treatment facilities, and other industrial

automation and control applications operating in harsh or

out-of-plant environments

› Electrical substation video and perimeter surveillance

The NetWave® NW9[E] ultra-high throughput, impact-resistant hardened wireless

Ethernet transmission device can be configured through the embedded User Interface

as a Client or as an Access Point. This single radio model was designed for high

throughput point-to-point or multi-point applications and comes with an integrated

19dBi, 17º beamwidth antenna. The NW9[E] supports up to 500 Mbps throughput

using 802.11ac MIMO technology. The units can be powered by an 802.3af/at PoE

compliant device or through a sold-separately PoE injector with the second Ethernet

port serving as an IEEE802.3af power source. The NW9 is FCC certified for use

in North America and the NW9E is ETSI, DFS and TPC certified for use in the

European Union.

NW9[E]

Ultra-High Throughput, Impact-Resistant

Hardened Wireless Ethernet Device

2IP67802.3af/at802.11ac-40º TO +70º 15W

Summary of content (3 pages)

PAGE 1
Ultra-High Throughput, Impact-Resistant Hardened Wireless Ethernet Device NW9[E] -40º TO +70º 802.11ac 15W 802.3af/at IP67 2 The NetWave® NW9[E] ultra-high throughput, impact-resistant hardened wireless Ethernet transmission device can be configured through the embedded User Interface as a Client or as an Access Point. This single radio model was designed for high throughput point-to-point or multi-point applications and comes with an integrated 19dBi, 17º beamwidth antenna.
PAGE 2
Ultra-High Throughput, Impact-Resistant Hardened Wireless Ethernet Device NW9[E] SPECIFICATIONS 5GHz Wireless Radio Software Features EIRP NW9 (FCC): Up to +36dBm for point to multipoint deployments, +49dBm for point to point deployments with MAC-lock feature enabled NW9E (ETSI): +30dBm RF Output +30dBm Rated Transmitter Operational Frequency 5180MHz – 5825MHz, Region-dependent. Not all frequencies are supported in all regions. Contact ComNet for frequencies supported in your region.
PAGE 3
Ultra-High Throughput, Impact-Resistant Hardened Wireless Ethernet Device NW9[E] TYPICAL APPLICATIONS High Throughput Point-to-Point Topology (Shown with PoE Cameras) Ethernet 1Gbps Ethernet NW9 (Access Point) NW9 (Client) P1 PoE 1Gbps Ethernet PoE Camera .. .. ..