Data Sheet

ManualsBrandsComnet ManualsElectronicsHardened Small Form Point-to-Point Wireless Ethernet Kit

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› Lifetime Warranty

› Up to 95Mbps Throughput

› 802.11a/n Compliant

› Distances up to 2 mi (FCC) or 2km (ETSI)

› Powered by the included power injection module or by an

IEEE802.3af PoE compliant device

› Environmentally Hardened -40º to +75ºC

› Meets class IP67 dust and water immersion protection

standards

› ETSI Standards (EU Region only):

– DFS Dynamic Frequency Selection

– TPC Transmit Power Control

› Secure transmission: WPA2 – AES or TKIP encryption

› ComNet Antenna alignment feature eases installation and

setup

› RF Spectrum Survey Tools

› Antenna Alignment Tools

› LED array displays unit operational status along with received

signal strength

APPLICATIONS

› Simple to deploy and cost-effective alternative to physical

connections to Ethernet edge equipment

› Integration of Ethernet where right-of-way issues mandate

wireless communications

› ITS traffic signalization networks and Video Detection

Systems (VDS)

› ITS roadside and city center CCTV surveillance, and

surveillance of high-value or mission-critical assets

› Wireless communications in manufacturing, petrochemical

refineries, wastewater treatment facilities, and other industrial

automation and control applications operating in harsh or

out-of-plant environments

› Electrical substation video and perimeter surveillance

The NetWave® industrially hardened wireless Ethernet transmission kit includes

a Client and an Access Point. The NWK1/M and NWK2/M support up to 95Mbps

throughput using MIMO technology. The units can be powered by an IEEE 802.3af

PoE compliant device or through the supplied power injection module. The

NWK1/M is FCC certified for use in North America and the NWK2/M is ETSI, DFS

and TPC certified for use in the European Union. This mini unit come in an ultra-

small form factor that is a new addition to the ComNet NetWave product family.

NWK1/M and NWK2/M

Mini Industrially Hardened Point-to-Point

Wireless Ethernet Kit

1IP67INCLUDED 802.3af-40º TO 75ºC

Summary of content (2 pages)

PAGE 1
Mini Industrially Hardened Point-to-Point Wireless Ethernet Kit NWK1/M and NWK2/M INCLUDED -40º TO 75ºC 802.3af IP67 1 The NetWave® industrially hardened wireless Ethernet transmission kit includes a Client and an Access Point. The NWK1/M and NWK2/M support up to 95Mbps throughput using MIMO technology. The units can be powered by an IEEE 802.3af PoE compliant device or through the supplied power injection module.
PAGE 2
Mini Industrially Hardened Point-to-Point Wireless Ethernet Kit NWK1/M and NWK2/M SPECIFICATIONS Wireless Radio Software Features EIRP NWK1/M (FCC): Up to +36dBm for point to multipoint deployments, +42dBm for point to point deployments with MAC-lock feature enabled NWK2/M (ETSI): +30dBm RF Output +26dBm Rated Transmitter Operational Frequency 5180MHz – 5825MHz, Region-dependent. Not all frequencies are supported in all regions. Contact ComNet for frequencies supported in your region.