Data Sheet

ManualsBrandsComnet ManualsElectronicsHardened Point-to-Point Wireless Ethernet Kit

LIFETIME WARRANTY* WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› Pre-configured Access Point and Client units for quick setup

› Up to 95 Mbps Throughput

› 802.11a/n Compliant

› Distances up to 2 mi (FCC) or 2km (ETSI)

› Powered by the included power injection module or by an

IEEE802.3af PoE compliant device

› Environmentally Hardened -40º to +75ºC

› Meets class IP67 dust and water immersion protection

standards

› ETSI Standards (EU Region only):

– DFS Dynamic Frequency Selection

– TPC Transmit Power Control

› Secure transmission: WPA2 – AES or TKIP encryption

› ComNet Antenna alignment feature eases installation and

setup

› RF Spectrum Survey Tools

› Antenna Alignment Tools

› LED array displays unit operational status along with

received signal strength

› Radio Internal Components covered by Lifetime Warranty.

› Enclosure covered by Three Year Warranty.

APPLICATIONS

› Simple to deploy and cost-effective alternative to physical

connections to Ethernet edge equipment

› Integration of Ethernet where right-of-way issues mandate

wireless communications

› ITS traffic signalization networks and Video Detection

Systems (VDS)

› ITS roadside and city center CCTV surveillance, and

surveillance of high-value or mission-critical assets

› Wireless communications in manufacturing, petrochemical

refineries, wastewater treatment facilities, and other

industrial automation and control applications operating in

harsh or out-of-plant environments

› Electrical substation video and perimeter surveillance

The NetWave® pre-configured point-to-point industrially hardened wireless

Ethernet Transmission kit that allows Ethernet data to be transmitted between a

Client remote location and the Access Point or head end. The NWK1 and NWK2

support up to 95 Mbps throughput due to MIMO technology. An easy to read

LED array displays unit operational status along with received signal strength

ensuring optimal installation and operation. The units can be powered by an IEEE

802.3af PoE compliant device or through the supplied power injection module. The

NWK1 is FCC certified for use in North America and the NWK2 is ETSI, DFS and

TPC certified for use in the European Union. Each kit contains two passive power

injectors, power supplies and mounting hardware.

NWK1/NWK2

Industrially Hardened

Point-to-Point Wireless Ethernet Kit

1IP67INCLUDED 802.3af/at-40º TO 75ºC

Summary of content (2 pages)

PAGE 1
Industrially Hardened Point-to-Point Wireless Ethernet Kit NWK1/NWK2 INCLUDED -40º TO 75ºC 802.3af/at IP67 1 The NetWave® pre-configured point-to-point industrially hardened wireless Ethernet Transmission kit that allows Ethernet data to be transmitted between a Client remote location and the Access Point or head end. The NWK1 and NWK2 support up to 95 Mbps throughput due to MIMO technology.
PAGE 2
Industrially Hardened Point-to-Point Wireless Ethernet Kit NWK1/NWK2 SPECIFICATIONS Wireless Radio Power EIRP NW1 (FCC): Up to +36dBm for point to multipoint deployments, +45dBm for point to point deployments with MAC-lock feature enabled NW2 (ETSI): +30dBm RF Output +26dBm Rated Transmitter Operational Frequency 5180MHz – 5825MHz, Region-dependent. Not all frequencies are supported in all regions. Contact ComNet for frequencies supported in your region.