Data Sheet

ManualsBrandsCOMNET ManualsSignal ExtendersEnvironmentally Hardened High Throughput Wireless Ethernet Kit

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› High throughput:

- Up to 180 Mbps in one direction

- Up to 240 Mbps total full duplex

› Lifetime Warranty

› IEEE802.3at PoE Compliant PD

› Over current protection and 3 layers of Ethernet surge

suppression on the PD port

› 802.11a/n Compliant

› Distances up to 2 mi (FCC) or 2km (ETSI)

› Environmentally Hardened -40º to +70ºC

› Meets class IP67 dust and water immersion protection

standards

› ETSI Standards (EU Region only):

– DFS Dynamic Frequency Selection

– TPC Transmit Power Control

› Secure transmission: WPA2 – AES or TKIP encryption

› ComNet Antenna alignment feature eases installation

and setup

› RF Spectrum Survey Tools

› Antenna Alignment Tools

› LED array displays unit operational status along with

received signal strength

APPLICATIONS

› High Throughput Back Haul Link for installations that require

connecting to more than one Ethernet device

› Ideal for PoE Camera connectivity

› Simple to deploy and cost-effective alternative to physical

connections to Ethernet edge equipment

› Integration of Ethernet where right-of-way issues mandate

wireless communications

› ITS traffic signalization networks and Video Detection

Systems (VDS)

› Multicast traffic-based video systems

› ITS roadside and city center CCTV surveillance, and

surveillance of high-value or mission-critical assets

› Wireless communications in manufacturing, petrochemical

refineries, wastewater treatment facilities, and other industrial

automation and control applications operating in harsh or

out-of-plant environments

› Electrical substation video and perimeter surveillance

The NetWave

NWK7[E] environmentally hardened High Throughput (HT)

wireless Ethernet transmission kits are designed for high throughput point-to-

point or multi-point applications. Each unit comes with an integrated 19dBi, 17º

beamwidth antenna. The NW7[E] units support up to 240Mbps throughput using

MIMO technology. The units can be powered by an 802.3af/at PoE compliant

device or through a supplied power injection module with the second Ethernet

port serving as an IEEE802.3af power source. The NWK7 is FCC certified for use

in North America and the NWK7E is ETSI, DFS and TPC certified for use in the

European Union.

NWK7[E]

Environmentally Hardened

High Throughput Wireless Ethernet Kit

2IP67INCLUDED 802.3af/at15W

-40º TO 70ºC

Summary of content (4 pages)

PAGE 1
Environmentally Hardened High Throughput Wireless Ethernet Kit NWK7[E] INCLUDED -40º TO 70ºC 15W 802.3af/at IP67 2 The NetWave® NWK7[E] environmentally hardened High Throughput (HT) wireless Ethernet transmission kits are designed for high throughput point-topoint or multi-point applications. Each unit comes with an integrated 19dBi, 17º beamwidth antenna. The NW7[E] units support up to 240Mbps throughput using MIMO technology. The units can be powered by an 802.
PAGE 2
Environmentally Hardened High Throughput Wireless Ethernet Kit NWK7[E] SPECIFICATIONS 5GHz Wireless Radio Software Features EIRP NW7 (FCC): +4dBm to +26dBm NW7E (ETSI): +30dBm RF Output +26dBm Rated Transmitter Operational Frequency 5500GHz - 5825GHz, Region-dependent. Not all frequencies are supported in all regions. Contact ComNet for frequencies supported in your region.
PAGE 3
Environmentally Hardened High Throughput Wireless Ethernet Kit NWK7[E] TYPICAL APPLICATIONS High Throughput Point-to-Point Topology (Shown with PoE Cameras) Ethernet 1Gbps Ethernet NW7 (Access Point) NW7 (Client) P1 PoE 1Gbps Ethernet PoE Camera .. .. ..
PAGE 4
Environmentally Hardened High Throughput Wireless Ethernet Kit NW7/NW7E TYPICAL APPLICATIONS (CONT’D) NW1 (Client) Multiple Remote Camera Topologies Ethernet PIM or other PSE device Ethernet PoE NW1 (Client) 1Gbps Ethernet Ethernet Power IP Camera PIM or other PSE device Ethernet Power P1 PoE PC PoE NW7/IA870 (240 Mbps Access Point) NVR NW1 (Client) Ethernet LEGEND IP Camera PIM or other PSE device Ethernet PoE WIRELESS P1 PORT 1 PD P2 PORT 2 PSE CAT5 POWER ETHERNET NW1 (Client)