Data Sheet

ManualsBrandsComnet ManualsWireless TransmissionImpact-Resistant Hardened Wireless Ethernet Kit

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› Up to 500 Mbps throughput

› Lifetime Warranty

› Sturdy cast aluminum enclosure

› IEEE802.3at PoE Compliant PD

› Over current protection and 3 layers of Ethernet surge

suppression on the PD port

› 802.11ac Compliant

› Distances up to 2 mi (FCC) or 2 km (ETSI)

› Distances up to 4 mi (FCC) with MAC Lock enabled

› Environmentally Hardened -40º to +70ºC

› Meets class IP67 dust and water immersion protection

standards

› ETSI Standards (EU Region only):

– DFS Dynamic Frequency Selection

– TPC Transmit Power Control

› Secure transmission: WPA2 – AES or TKIP encryption

› ComNet Antenna alignment feature eases installation and

setup

› RF Spectrum Survey Tools

› Antenna Alignment Tools

› LED array displays unit operational status along with received

signal strength

APPLICATIONS

› High Throughput Back Haul Link for installations that require

connecting to more than one Ethernet device

› Ideal for PoE Camera connectivity

› Simple to deploy and cost-effective alternative to physical

connections to Ethernet edge equipment

› Integration of Ethernet where right-of-way issues mandate

wireless communications

› ITS traffic signalization networks and Video Detection

Systems (VDS)

› Multicast traffic-based video systems

› ITS roadside and city center CCTV surveillance, and

surveillance of high-value or mission-critical assets

› Wireless communications in manufacturing, petrochemical

refineries, wastewater treatment facilities, and other industrial

automation and control applications operating in harsh or

out-of-plant environments

› Electrical substation video and perimeter surveillance

The NetWave® NWK9[E] ultra-high throughput, impact-resistant hardened wireless

Ethernet transmission kit comes preconfigured with one Client and one Access

Point. This single radio model was designed for high throughput point-to-point

applications and comes with an integrated 19dBi, 17º beamwidth antenna. The

NWK9[E] supports up to 500 Mbps throughput using 802.11ac MIMO technology.

The units can be powered by an 802.3af/at PoE compliant device or through a sold-

separately PoE injector with the second Ethernet port serving as an IEEE802.3af

power source. The NWK9 is FCC certified for use in North America and the NWK9E

is ETSI, DFS and TPC certified for use in the European Union.

NWK9[E]

Ultra-High Throughput, Impact-Resistant

Hardened Wireless Ethernet Kit

2IP67802.3af/at802.11ac-40º TO +70º 15W

Summary of content (3 pages)

PAGE 1
Ultra-High Throughput, Impact-Resistant Hardened Wireless Ethernet Kit NWK9[E] -40º TO +70º 802.11ac 15W 802.3af/at IP67 2 The NetWave® NWK9[E] ultra-high throughput, impact-resistant hardened wireless Ethernet transmission kit comes preconfigured with one Client and one Access Point. This single radio model was designed for high throughput point-to-point applications and comes with an integrated 19dBi, 17º beamwidth antenna. The NWK9[E] supports up to 500 Mbps throughput using 802.
PAGE 2
Ultra-High Throughput, Impact-Resistant Hardened Wireless Ethernet Kit NWK9[E] SPECIFICATIONS 5GHz Wireless Radio Software Features EIRP NW9 (FCC): +49dBm for point to point deployments with MAC-lock feature enabled NW9E (ETSI): +30dBm RF Output +30dBm Rated Transmitter Operational Frequency 5180MHz – 5825MHz, Region-dependent. Not all frequencies are supported in all regions. Contact ComNet for frequencies supported in your region.
PAGE 3
Ultra-High Throughput, Impact-Resistant Hardened Wireless Ethernet Kit NWK9[E] TYPICAL APPLICATIONS High Throughput Point-to-Point Topology (Shown with PoE Cameras) Ethernet NWK9_AP 1Gbps Ethernet NWK9_CL P1 PoE 1Gbps Ethernet PoE Camera .. .. ..