Data Sheet
24 May 2017
© 2017 Communication Networks. All Rights Reserved. “ComNet,” the “ComNet Logo,” “NetWave” and the “NetWave Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
 | 
DANBURY, CONNECTICUT 06810
 | 
USA
 | 
T: 203.796.5300
 | 
F: 203.796.5303
 | 
TECH SUPPORT: 1.888.678.9427
 | 
INFO@COMNET.NET
8 TURNBERRY PARK ROAD
 | 
GILDERSOME
 | 
MORLEY
 | 
LEEDS, UK LS27 7LE
 | 
T: +44 (0)113 307 6400
 | 
F: +44 (0)113 253 7462
 | 
INFO-EUROPE@COMNET.NET
NWKBB100
Industrially HardenedDC-Battery Power Management System
SPECIFICATIONS
Power
Nominal Input Voltage  115 / 230 ~ 277 VAC
Voltage range  90-135 / 180-305 VAC
Inrush Current   ≤42 A ≤ 5 msec  
(V
n
 – I
n
 nom. Load)
Frequency  47 – 63 Hz
Input Current  3.3 ~ 2.2 A (115 – 230 VAC) 
Internal fuse  4 A (factory replaceable)
External Fuse  16A (recommended)
Output
Output Voltage (V
n
) / Nominal Current (I
n
)  48 VDC / 5 A
Output Current I
n
  5 A
Efficiency (at 50% of rated current)  ≥ 83%
Turn-On delay after applying input voltage 1.5 sec. (max)
Start up with Strong Load (capacitive load) Yes, Unlimited
Dissipation power load max  48 W
Battery Output
Boost charge (25 °C) (at I
n
)  57.6 VDC
Max. time Bust Charge  15 h
Min. time Bust Charge  1 min.
Trickle charge (25 °C) (at I
n
)  56 VDC
Recovery Charge  2 ~ 24 VDC
Charging current max I
batt
  5 A ± 5%
Charging current limiting I
adj
  20 ÷ 100 % / I
batt
Reverse battery protection  Yes
Sulfated battery check  Yes by Jumper
Detection of element in short circuit  Yes
Quiescent Current  ≤ 5 mA
Charging Curve automatic:  I
UoUo
 3 stage
Load Output
Output Voltage (at I
n
)  44 ~ 57.6 VDC
Nominal current I
load
  1.1 × I
n
 A ± 5%
Continuous current (w/out battery) I
load
 = I
n
  10 A
Continuous current (w/ battery) I
load 
= I
n
 + I
batt
 20 A
Max. Current Output load (main) I
load
(4sec.) 30 A max.
Max. Current Output Load (backup) I
load
 (4 sec.) 20 A max.
Push Button Start  From battery without main
Protection Alarm against total discharge  38-40 VDC battery
Threshold alarm for battery almost flat  40-42 VDC battery
Backup Power
Battery Voltage   48 VDC  
(4 × 12 VDC AGM Batteries in Series)
Battery Capacity  24Ah × 4
Continuous Power Reserve Time
15W Load  40 Hours Backup Time
30W Load  18 Hours Backup Time
60W Load  8 Hours Backup Time 
Mechanical
Enclosure  Powder Coated Steel
Enclosure Size   16 × 16 × 10 in  
(40.64 × 40.64 × 25.4 cm)
Shipping Weight  125 lb / 56.7 kg
Environmental
MTBF  >100,000 hours 
Operating Temp  -40° C to +70° C 
Storage Temp  -40° C to +85° C 
AGENCY COMPLIANCE
AGENCY COMPLIANCE
AGENCY COMPLIANCE
Listed power ratings under ideal conditions( 70°F / 21.1°C).
Batteries can lose up to 50% power below -17.8°C / 0°F.
Minimum recharge time varies by application, ComNet recommends a minimum of 8 hours of charging per day.



