Installation Manual

INS_NWKBB100_REV– 06/10/13 PAGE 6
INSTALLATION AND OPERATION MANUAL NWKBB100
TECH SUPPORT: 1.888.678.9427
2.0 Installation
Preparing the Enclosure
The NWKBB100 enclosure has integrated mounting brackets and a bolt on mounting plate simplifying
installation.
Prepare the mounting plate for DIN Rail installation by loosening the screws in the top corners and
removing the mounting plate (the appearance of the included mounting plate may vary).
Place the DIN Rail in its desired location. If the pre drilled holes do not align, use a 5/32 drill bit to
create a new mounting location.
Secure the DIN Rail to the mounting plate using the provided Screw, Washer and Nut.
Re-attach the mounting plate to the enclosure and tighten bolts.