Data Sheet
LIMITED WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FEATURES
› Power supply, battery charger, battery care module and
battery backup module in one controller
› Three battery charging modes
- Boost, Trickle and Recovery Charge
› Absorption Glass Matt (AGM) Batteries included
› Adjustable charging current
› Battery diagnostic and fault identification LED built in
› Several output protection features such as short circuit, deep
battery discharge etc.
› Weatherproof IP65 rated enclosure
› Operating Temperature -25 to +70C°
APPLICATIONS
› Ideal for PoE Camera connectivity at light poles when power
is only provided at night when a used with a PoE Switch
› Emergency DC-Battery Power Backup for critical edge
devices
› Simple to deploy DC-Battery can be used indoors to backup
Access Control, Automatic Revolving Doors, Fire Alarms,
Emergency Lighting and many other applications
The NetWave® NWKBB200 DC-Battery Power Solution provides consistent power for
your devices in locations where power is on a timer or they have frequent blackouts or
brownouts. The NWKBB200 supports AC input ranging from 110 to 277 VAC, and can
also support 347 VAC and 480 VAC with an optional Multi Tap Power Transformer.
The intelligent controller distributes power to the load and batteries when AC power
is available and instantly switches over to DC output only when AC power is lost.
The kit includes valve-regulated lead-acid batteries, outdoor enclosure, mounting
hardware and Smart DC-Battery Power Controller. The aluminum outdoor enclosure
has two 180° door hinges and a pad lockable latch for security. The enclosure has built
in mounting brackets that support pole and wall mounting.
NWKBB200
Industrially Hardened DC-Battery Power Management System
ENCLOSUREBATTERIES
INCLUDED
-25º TO
+
70º