Data Sheet

RL1000GW
Small Form Factor Substation-Rated Secure Ethernet Layer 3 Router/Gateway with Optional 2G/3G/4G
LTE Cellular Radio Link, and 100/1000 Mbps SFP Uplink Port
SPECIFICATIONS
Connectors
1 or 2 × RS-232 RJ-45 serial port, with control lines
1 RS-485 RJ-45 serial port
1 × 10/100TX RJ-45 Ethernet port
1 × 100/1000 SFP¹ Ethernet port
Cellular modem with 2 SIM cards for GPRS/UMTS or HSPA/EVDO/LTE networks.
Discrete lines: 2 In, 2 Out
Console RS-232 RJ-45 serial port
Security
Distributed DPI Firewall Profile based firewall
Security rules planning per service group
Firewall monitoring Mode
Firewall enforcement Mode
Firewall Learning Mode
IEC 104 DPI Firewall
IEC 61850 DPI Firewall
Modbus TCP DPI Firewall
DNP3 TCP DPI Firewall
VPN IPsec Certificates X.509
IPsec CRL server
IPsec CA server
IPsec Dynamic Key Exchange
IPSec encryption AES
IPSec encryption 3DES
L3 IPSec VPN
L3 mGRE DM-VPN
Access control Access Lists L3
Access Lists L4
VRF
NAT
User activity report
local APA (Authentication Proxy Access)
User activity report (under local APA)
OS image encryption
Protection
Conditioned / scheduled system reboot
Protection between Cellular ISP (SIM cards backup)
Networking
SCADA gateway for IEC101/104, ModBus RTU/TCP and DNP3 RTU/TCP
Terminal Server frame and byte modes
Serial transparent tunneling byte mode
QOS
Routing Static Routing
OSPF v2
IPv4
Switching Auto Crossing
Auto Negotiation IEEE 802.3ab
VLAN Tagging
Time Local Time settings
Diagnostic Counters & statistics per Port
LED diagnostics
Ping
RMON
DDM
Management
Console serial port
Backup / Restore running config
Conditioned/ scheduled system reboot
Remote management and upgrade
TFTP/ SFTP Client
Safe Mode
Syslog
Mechanical
Indicator LEDs PWR Port Activity/Speed RUN SIM × 2 E2
Enclosure Rugged - IP 30 rated, No fans
Weight 1.4 kg
Size (H × W × D) 106 × 50 × 120 mm
Mounting DIN rail enclosure
Environmental
MTBF > 250,000 hours
Storage Temperature -40º to +85ºC
Operating Temperature -40º to + 85ºC²
Operating Humidity 0 to 95%
Power
Power input 12/24V Version: 9 - 36 VDC
24/48V Version: 18 - 60 VDC
Consumption 12 W Max
Compliance
IEC 61850-3 - Electric Utility Substations
IEEE 1613, Class 2 - Electric Utility Substations
NEMA TS-1/TS-2 - Traffic Signal Control Equipment
A
GENCY COMPLIANCE
AGENCY COMPLIANCE
[1] SFP Fiber modules require a fiber installation with a minimum 30 dB connector return loss. Multimode fiber needs to meet or exceed
fiber standard ITU-T G.651. Single mode fiber needs to meet or exceed fiber standard ITU-T G.652The use of Super Polish Connectors is
recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
Note: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427