Installation Manual

INS_RLXE4GE24MODMS_REV– 20 Dec 2017 PAGE 46
INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
Loop Protection Configuration
This page allows the user to inspect the current Loop Protection configurations, and possibly
change them as well.
General Settings
Enable Loop
Protection
Controls whether loop protections is enabled (as a whole).
Transmission Time The interval between each loop protection PDU sent on each port. valid values are
1 to 10 seconds.
Shutdown Time The period (in seconds) for which a port will be kept disabled in the event of a loop
is detected (and the port action shuts down the port). Valid values are 0 to 604800
seconds (7 days). A value of zero will keep a port disabled (until next device restart).
Port Configuration
Port The switch port number of the port.
Enable Controls whether loop protection is enabled on this switch port.
Action Configures the action performed when a loop is detected on a port. Valid values
are Shutdown Port, Shutdown Port and Log or Log Only.
Tx Mode Controls whether the port is actively generating loop protection PDU’s, or whether
it is just passively looking for looped PDU’s.
Save Click to save changes.
Reset Click to undo any changes made locally and revert to previously saved values.