Installation Manual

INS_RLXE4GE24MODMS_REV– 20 Dec 2017 PAGE 52
INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
Maintenance Entity End Point Configuration
This page allows the user to inspect and configure the current MEP Instance.
Object Description
Instance Data
MEP Instance The ID of the MEP.
Domain Port: This is a MEP in the Port Domain.
EVC: This is a MEP in the EVC Domain. 'Flow Instance' is an EVC. The EVC must be
created
VLAN: This is a MEP in the VLAN Domain. 'Flow Instance' is a VLAN. In case of Up-MEP
the VLAN must be created
MPLS Link: This is a MEP in the MPLS Link Domain.
MPLS Tunnel: This is a MEP in the MPLS Tunnel Domain.
MPLS PW: This is a MEP in the MPLS Pseudo Wires Domain.
MPLS LSP: This is a MEP in the MPLS LSP Domain.
Mode MEP: This is a Maintenance Entity End Point.
MIP: This is a Maintenance Entity Intermediate Point.
Direction Down: This is a Down MEP - monitoring ingress OAM and traffic on 'Residence Port'.
Up: This is a Up MEP - monitoring egress OAM and traffic on 'Residence Port'.
Residence Port The port where MEP is monitoring - see 'Direction'. For a EVC MEP the port must be a
port in the EVC. For a VLAN MEP the port must be a VLAN member.
Flow Instance The MEP is related to this flow - See 'Domain'. This is not relevant and not shown in
case of Port MEP.