Installation Manual

INS_RLXE4GE24MODMS_REV– 20 Dec 2017 PAGE 53
INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
Object Description
Tagged VID Port MEP: An outer C/S-tag (depending on VLAN Port Type) is added with this VID.
Entering '0' means no TAG added.
EVC MEP: This is not used.
VLAN MEP: This is not used.
EVC MIP: On Serval, this is the Subscriber VID that identify the subscriber flow in this
EVC where the MIP is active.
This MAC The MAC of this MEP - can be used by other MEP when unicast is selected (Info only).
Instance Configuration
EVC Policy ID This is the Policy number of the relevant ECE. Policy ID is used to assure that received
OAM PDU is able to hit a IS2 entry. If this value is '0' IS2 rules will be created on
classified VID. If this is NOT '0' IS2 rules will be created on this Policy (PAG). This must
be equal to ECE Policy Number if OAM PDU will hit the ECE IS0. This is the case if an
ECE is created with 'tag_type' as 'any'.
EVC QoS This is only relevant for a EVC MEP. This is the Qos of the EVC and used for getting QoS
counters for Loss Measurement.
Level See help on MEP create WEB.
Format This is the configuration of the two possible Maintenance Association Identifier formats.
ITU ICC: This is defined by ITU (Y1731 Fig. A3). 'Domain Name' is not used. 'MEG id'
must be max. 13 char.
IEEE String: This is defined by IEEE (802.1ag Section 21.6.5). 'Domain Name' can be
max. 16 char. 'MEG id' (Short MA Name) can be max. 16 char.
ITU CC ICC: This is defined by ITU (Y1731 Fig. A5). 'Domain Name' is not used. 'MEG id'
must be max. 15 char.
Domain Name This is the IEEE Maintenance Domain Name and is only used in case of 'IEEE String'
format. This string can be empty giving Maintenance Domain Name Format 1 - Not
present. This can be max 16 char.
MEG Id This is either ITU MEG ID or IEEE Short MA Name - depending on 'Format'. See
'Format'. In case of ITU ICC format this must be 13 char. In case of ITU CC ICC format
this must be 15 char. In case of IEEE String format this can be max 16 char.
MEP Id This value will become the transmitted two byte CCM MEP ID.
Tagged VID This value will be the VID of a TAG added to the OAM PDU.
VOE This will attempt to utilize VOE HW for MEP implementation. Not all platforms support
VOE.
cLevel Fault Cause indicating that a CCM is received with a lower level than the configured for
this MEP.
cMEG Fault Cause indicating that a CCM is received with a MEG ID different from configured
for this MEP.
cMEP Fault Cause indicating that a CCM is received with a MEP ID different from all 'Peer
MEP ID' configured for this MEP.
cAIS Fault Cause indicating that AIS PDU is received.
cLCK Fault Cause indicating that LCK PDU is received.
cSSF Fault Cause indicating that server layer is indicating Signal Fail.