Installation Manual

INS_RLXE4GE24MODMS_REV– 20 Dec 2017 PAGE 70
INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
Object Description
Transmit APS The transmitted APS according to State Transition Tables in G.8032.
Port 0 Receive APS The received APS on Port 0 according to State Transition Tables in G.8032.
Port 1 Receive APS The received APS on Port 1 according to State Transition Tables in G.8032.
WTR Remaining Remaining WTR timeout in milliseconds.
RPL Un-blocked APS is received on the working flow.
No APS Received RAPS PDU is not received from the other end.
Port 0 Block Status Block status for Port 0 (Both traffic and R-APS block status). R-APS channel is never
blocked on sub-rings without virtual channel.
Port 1 Block Status Block status for Port 1 (Both traffic and R-APS block status). R-APS channel is never
blocked on sub-rings without virtual channel.
FOP Alarm Failure of Protocol Defect(FOP) status. If FOP is detected, red LED glows; else green
LED glows.
Apply Click to apply changes.
Auto-refresh Check this box to refresh the page automatically. Automatic refresh occurs every 3
seconds.
Refresh Click to refresh the page immediately.
Reset Click to undo any changes made locally and revert to previously saved values.