User Manual

Setup

Solo and Duetto are sophisticated multi-source media players. To simplify the setup process as

much as possible, when Solo and Duetto are first started, a “Setup wizard” helps walk you through

the basic steps to enable connections with the different audio sources.

The various listening modes have different requirements:

 Internet Radio requires a suitable Internet broadband connection (usually via a local

wireless network).

 Multi-room requires connection to a wireless network.

 Spotify Connect requires connection to a wireless network connected to the internet

along with a paid Spotify Premium account.

 Music Player requires connection to a wireless network and/or USB connected device.

 DAB/DAB+ (where available)/FM requires a DAB/DAB+ or FM broadcast signal

received via the attached antenna.

 Bluetooth requires a Bluetooth-capable device such as a smart phone or tablet.

 Aux 1 & 2 in requires a connection via the Aux-in sockets with a stereo 3.5mm audio

cable (not included).

 Optical in requires a connection via the Optical in socket with a Toslink cable (not

included).

To start Solo or Duetto, connect the unit to a suitable power source using the power cord provided.

The unit starts up after a slight delay before the display is initialized.

Solo and Duetto will normally enter the last used listening mode. The first time they are started (or

after being reset to factory settings) the setup wizard is launched automatically:

Setup wizard

When Solo and Duetto are started for the first time, they run

through a setup wizard to configure settings for date/time and

network. Once this has finished, the system is ready to use in

most modes.

Note: To change these settings later, select Menu >

System settings > and select the required settings option(s)

(see section 0 System settings for further details).

To run the setup wizard again, select Menu > System

settings > Setup wizard.

The Network settings can be reset later manually running the

Network wizard, select Menu > System settings >

Network wizard (see section 0 System settings for further