User Manual

Standby Clock format
Choose between an analog clock face or digital time and date when in standby.
d. Language
The default language is English. To change, highlight and select your language. Languages include
English, Danish, Dutch, French, German, Italian, Norwegian, Spanish, and Swedish.
e. Factory reset
A Factory reset resets all user settings to default values, meaning time/date, network
configuration, and Presets are erased. However, the radio’s current software version is
maintained, as is registration with the Internet radio portal (see Page 32). Internet radio favorites
therefore also remain unless you re-register your radio with another account on the portal website.
If you experience a problem with your Solo or Duetto, performing a Factory reset may resolve it.
To perform a factory reset, press and hold the Menu knob > System settings > Factory
reset > Proceed? > Yes.
You should make note of your six Presets, EQ settings, Alarm settings, and WiFi network password
prior to performing a Factory reset. You will need to repeat the entire Setup wizard process after
performing a Factory reset.
f. Software update
Press and hold the Menu knob > System settings > Software update.
Como Audio may, at our discretion, issue software updates via WiFi containing bug fixes and/or
additional features. You can either check for updates manually, or set Solo and Duetto to check
periodically automatically (this is the default). If the Solo or Duetto detect that newer software is
available, they will ask if you want to go ahead with an update. If you agree, the new software is
then downloaded and installed. After a software update, all user settings are maintained.
CAUTION:
Before starting a software update, ensure Solo or Duetto is plugged in to
a stable power connection. Disconnecting or losing power during a
software update may permanently damage the unit!
A software history will be available on our web site as updates are released: www.comoaudio.com
To turn automatic checking on or off, push and hold the Menu knob > System settings >
Software update > Auto-check setting.
g. Setup wizard
Press and hold the Menu knob > System settings > Setup wizard .
The Setup wizard runs automatically when Solo or Duetto is powered on for the very first time, but
this menu option allows you to run the Setup wizard at any time. See Section 5.2.
h. Info (not to be confused with the Info key on the remote control)
Press and hold the Menu knob > System settings > Info.
Shows details of the current system including:
 SW Version: Software version running on your Solo or Duetto
 Radio ID: Unique code used to identify your Solo or Duetto.
 Friendly name: (name by which your radio is identified on a network).