User Manual

Bluetooth
Bluetooth mode allows Bluetooth devices to pair with Solo and Duetto, stream music, and display information
(if available) about the track playing.
To enter Bluetooth mode, either press and hold the Menu knob > Main menu > Bluetooth, or rotate the
Source knob to scroll through the mode icons until Bluetooth is highlighted and press the Source knob in to
select.
To pair a Bluetooth device with Solo or Duetto
Upon changing the source to Bluetooth mode, this automatically puts Solo and Duetto into
discoverable mode in approximately 20 seconds.
On your Bluetooth-enabled smart device, such as a phone or tablet, make
sure you Bluetooth is on and then scan for devices after you see the
Bluetooth logo flashing in the lower right side of the display. It could
take up to 20 seconds for the logo to appear. Select ‘CA Solo’ or ‘CA
Duetto’ from the list of available Bluetooth devices. If your smart device
prompts you to enter a passcode, enter “0000”. Your Bluetooth-enabled smart
device’s volume should be set at 100%, and adjust Solo or Duetto’s volume
as desired. Different tracks can have different volume output levels and may require readjusting the volume.
Switch to another already paired Bluetooth
device
In Bluetooth mode, press and hold the Menu knob > View details
> Paired Device List, then select the desired device from the list.
Clear all paired devices
To erase the list of all Bluetooth paired devices you must perform a
Factory reset. See Page 25 regarding how to perform a Factory reset. Up to 8 paired devices will
be remembered. Any newly paired devices beyond the 8 will result in the oldest device being
deleted.
Bluetooth track control
While in Bluetooth mode you can pause, play, jump to next track, and jump to previous track (in the
playlist on the controlling Bluetooth device) using the remote’s keys. Note some smart devices do
not support all of these functions in Bluetooth mode.
Bluetooth connection details
For information on the current state of the Bluetooth connection and
paired Bluetooth devices, in Bluetooth mode, press and hold
the Menu knob > View details
The menu offers the following options:
Bluetooth Info – information on the current state and version of the Bluetooth connection on Solo
or Duetto.
Connected Device – details of the currently connected Bluetooth device.
Paired Device List – list of up to eight devices that have been paired with Solo or Duetto.
PRESETS: Bluetooth can be saved as a Preset and Presets can turn on the unit from standby.