User's Manual

www.comodule.com
Installation
For the installation, the following equipment is needed:
• COMODULE IoT module V 9
• Bolts for installation (come with COMODULE device)
• Compatible electric kick scooter ( Ninebot kick scooter used in the example)
Installing the modules on the scooters
• 1. Remove the bolts on the lower part of the tube of the scooter with a torx head.
• 2. Plug the scooters to the electricity and make sure they show battery signal on the display.
• 3. Attach the IoT module to the scooter. Use bolts ISO 7380 TX M6 X 20. Apply threadlocker to the
bolt.
• 4. Plug the cable of the module to the cable of the scooter.