User manual

ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 22/09/2014 | K01068
16
11. MAINTENANCE
11.1.Generalwarning
Before performing any type of maintenance you should:
• Always turn OFF the main power switch to the OFF position ( ).
• If the grinder is jammed, unplug it from the power source and contact an
authorizedservicetechnician.
Not following these warnings can compromise the safety of the grinder as well as
the user.
11.2.Generalmaintenanceofthegrindchamber
To guaranteethe efciency and correct operationof the grinder, it is essential to
follow manufacturer instructions and ensure that all maintenance work is carried
outbyqualiedstaff.
Dull burrs will result in; a lower quality grind, greater heat generation in the coffee
andgrinder,increasedelectricalconsumption,andnallyitputsadditionalstresson
the grinder motor.
NOTE: Based on extensive experience and a medium-hard coffee blend, we
recommend replacing the burrs after grinding 350 Kg/770 lb of coffee.
Burrschange RedSpeedLucidate
K3, K3 ELITE
300 Kg
K6, K6 PB
400 Kg
K6 SILENZIO
400 Kg
K8 SILENZIO
800 Kg 3500 Kg
K10 CONIC, K10 CONIC PB
1200 Kg 7500 Kg
K10 MASTER CONIC, K10 MASTER CONIC PB
1200 Kg 7500 Kg