User manual

ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 22/09/2014 | K01070
16
10.4.Cleaningtheoutsideofthegrinder
Tocleantheexteriorofthegrinder,rstwipewithadrysoftcloth,andthengently
wipe with a damp soapy cloth.
11. MAINTENANCE
11.1.Generalwarning
Before performing any type of maintenance you should:
• Always turn OFF the main power switch to the off position ( , and ).
• If the grinder is jammed, unplug it from the power source and contact an
authorizedservicetechnician.
Not following these warnings can compromise the safety of the grinder as well as
the user.
11.2.Generalmaintenanceofthegrindchamber
To guaranteethe efciency and correct operationof the grinder, it is essential to
follow manufacturer instructions and ensure that all maintenance work is carried
outbyqualiedstaff.
Dull burrs will result in; a lower quality grind, greater heat generation in the coffee
andgrinder,increasedelectricalconsumption,andnallyitputsadditionalstresson
the grinder motor.
NOTE: Based on extensive experience and a medium-hard coffee blend, we
recommend replacing the burrs after grinding 350 Kg/770 lb of coffee.
Burrchange
K3 TOUCH, K3 PUSH, K3 TOUCH ADVANCED 350 Kg